1. How to read the time • This watch uses an LCD “always on” display to show the time. The digits are displayed in hexagonal shapes, starting with • the hours at the top, minutes in the center and second at the bottom.
2. Operating the basic functions I. Turning on the backlight You can illuminate the display for a short time with the EL • backlight by pressing button A. This function works best at night time • II. How to read the date •...
Page 5
III. How to check the alarm time • Press button B twice to display the alarm time. The alarm mode icon indicates that you are in alarm mode. • The alarm on/off icon indicates that the alarm is either on •...
Page 6
3. How to set the time and animation Press and hold button A for 3 seconds to enter setting • mode. Note: after 7 seconds of inactivity setting mode will deactivate. I. Setting the hour • The time icon and hour digits will flash when you are in hour setting mode.
II. Setting the minutes • The time icon and the minute digits will flash when you are in minute setting mode. • Press button B to increase the minutes as required. Hold button B to increase the minutes more quickly. •...
Page 8
IV. Turning fractions of seconds on / off • You can choose to have fractions of seconds on or off when the time is shown Press button B to turn fractions of seconds on or off. • button A time indicator blinking second fractions animates (on)
4. How to set the date Press button B to display the date. • • Press and hold button A for 3 seconds to enter date setting mode. Note: after 7 seconds of inactivity setting mode will deactivate. I. Setting the year •...
Example : August button A month setting month blinking date indicator blinking button B • Press button A to confirm and move to date. Note: after 7 seconds of inactivity setting mode will deactivate. III. Setting the date • The date icon and the date digits will flash when you are in date setting mode.
5. How to set the alarm time • Press button B twice to display the alarm time. Note: after 7 seconds of inactivity setting mode will deactivate. I. Turning the alarm on or off • Press button A to turn the alarm on or off. The alarm icon indicates that the alarm is on.
Page 12
II. Setting the alarm hour The alarm icon and the hour digits will flash. • • The AM / PM icon in setting mode indicates that you are setting the alam time in AM or PM. • Press button B to increase the hour as required. Hold button B to increase the hours more quickly.
8. User information I. Battery This watch uses a CR2032 replaceable watch battery. • • Battery lifetime will vary depending on use, but is estimated to last for at least one year. • To maximize battery life you should limit use of the EL backlight.
SPECIFICATIONS Case Materials Stainless Steel Strap Materials Stainless Steel Case Dimensions 39 x 45.5 x 10.5 mm Finish brushed Maximum Fit 210mm (approx.) Wrist Size 140g Weight Display LCD with EL backlight Battery CR2025 Water Resistance 3ATM...
Need help?
Do you have a question about the Zone and is the answer not in the manual?
Questions and answers