Upgrading Memory - easyRAID S8A2-PETT Hardware User Manual

easyRAID S8A2-PETT Serial ATA II Disk Array Systems

Upgrading Memory

The disk array system takes a single DDR 184pin DIMM with a maximum capacity of 1
GB. Follow these instructions to upgrade the memory.
1 Remove the screws from the disk array system and pull the controller box.
2 Retaining away, the DIMM springs out of the socket. Remove the DIMM.
3 Gently push the new DIMM into the socket, then push the corners of the DIMM
down. The DIMM is secured by the DIMM retaining clips.
16