Diagnostic Error Codes - Lenovo THINKSTATION 7783 Hardware Maintenance Manual

Diagnostic error codes

Refer to the following diagnostic error codes when using the diagnostic tests. See "Running tests" on page
34 for the specific type for information about the diagnostic programs.
In the following index, X can represent any number.
Diagnostic Error Code
000-000-XXX BIOS Test Passed
000-002-XXX BIOS Timeout
000-024-XXX BIOS Addressing test failure
000-025-XXX BIOS Checksum Value error
000-026-XXX FLASH data error
000-027-XXX BIOS Configuration/Setup error
000-034-XXX BIOS Buffer Allocation failure
000-035-XXX BIOS Reset Condition detected
000-036-XXX BIOS Register error
000-038-XXX BIOS Extension failure
000-039-XXX BIOS DMI data error
000-195-XXX BIOS Test aborted by user
000-196-XXX BIOS test halt, error threshold exceeded
44
ThinkStation Hardware Maintenance Manual
FRU/Action
No action
1. Flash the system. See "Updating (flashing) the
BIOS" on page 169.
2. System board
1. Flash the system. See "Updating (flashing) the
BIOS" on page 169.
2. System board
1. Flash the system. See "Updating (flashing) the
BIOS" on page 169.
2. System board
1. Flash the system. See "Updating (flashing) the
BIOS" on page 169.
2. System board
1. Run the Setup Utility program.
2. Flash the system. See "Updating (flashing) the
BIOS" on page 169.
3. System board
1. Reboot the system.
2. Flash the system. See "Updating (flashing) the
BIOS" on page 169.
3. Run memory test
4. System board
1. Flash the system. See "Updating (flashing) the
BIOS" on page 169.
2. System board
1. Flash the system. See "Updating (flashing) the
BIOS" on page 169.
2. System board
1. Flash the system. See "Updating (flashing) the
BIOS" on page 169.
2. Adapter card
3. System board
1. Flash the system. See "Updating (flashing) the
BIOS" on page 169.
2. System board
Information only Restart the test, if necessary
1. Press F3 to review the log file.
2. Restart the test to reset the log file.