Lenovo THINKSTATION 7783 Hardware Maintenance Manual page 103

9. To install a new hard disk drive into the blue bracket, flex the bracket and align pin
and pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board 5 on the bottom of the hard disk drive.
Figure 31. Installing the hard disk drive into the bracket
10. Slide the new hard disk drive into the hard disk drive cage until it snaps into position.
11. Install the hard disk drive cage into the chassis until it snaps into position underneath the metal tab.
Make sure that the hard disk drive cage release button is secured in the chassis.
Figure 32. Installing the secondary hard disk drive
12. Connect the signal cable and the power cable to the new hard disk drive.
1 , pin 2 , pin 3
.
Chapter 9 Replacing FRUs
,
97