Chapter 6. Using The Setup Utility Program; Starting The Setup Utility Program; Viewing Or Changing Settings; Using Passwords - Lenovo THINKSTATION 7783 Hardware Maintenance Manual

Lenovo laptop user manual
Hide thumbs Also See for THINKSTATION 7783:
Table of Contents

Advertisement

Chapter 6. Using the Setup Utility program

You can use the Setup Utility program to view and change the configuration settings of your computer,
regardless of which operating system you are using. However, the operating system settings might override
any similar settings in the Setup Utility program.
This chapter provides information about the following topics to help you use the Setup Utility program:
"Starting the Setup Utility program" on page 37
"Viewing or changing settings" on page 37
"Using passwords" on page 37
"Selecting a startup device" on page 39
"Exiting the Setup Utility program" on page 40

Starting the Setup Utility program

This section provides instructions on how to start the Setup Utility program.
To start the Setup Utility program, do the following:
1. Make sure your computer is turned off.
2. Repeatedly press and release the F1 key when turning on the computer. When you hear multiple
beeps or see a logo screen, release the F1 key.
Note: If a Power-On Password or an Administrator Password has been set, the Setup Utility program
menu will not be displayed until you type the correct password. For more information, see "Using
passwords" on page 37.
The Setup Utility program might start automatically when the POST detects that hardware has been removed
or new hardware has been installed in your computer.

Viewing or changing settings

The Setup Utility program menu lists various items about the system configuration settings. To view or
change the settings, start the Setup Utility program. See "Starting the Setup Utility program" on page
37. Then, follow the instructions on the screen.
When working with the Setup Utility program, you must use the keyboard. The keys used to perform various
tasks are displayed at the bottom of each screen.

Using passwords

By using the Setup Utility program, you can set passwords to prevent unauthorized access to your computer
and data. The following types of passwords are available:
• Power-On Password
• Administrator Password
• Hard Disk Password
You do not have to set any passwords to use your computer. However, using passwords improves
computing security. If you decide to set any passwords, read the following sections.
© Copyright Lenovo 2011, 2012
37

Advertisement

Table of Contents
loading

Table of Contents