Page 1 Easy Search/Contents/Precautions docomo STYLE series Before Using the Handset P-02A Voice/Videophone Calls/PushTalk Phonebook ‘09.1 Sound/Screen/Light Settings ISSUE DATE: Security Settings Mail NAME: i-mode/i-motion/i-Channel/i-concier Full Browser/PC Movie PHONE NUMBER: Camera 1Seg MAIL ADDRESS: Music i-αppli/i-Widget INSTRUCTION MANUAL Osaifu-Keitai/ToruCa Map/GPS Function Data Management...
Page 2 FOMA terminal and keep them in a safe Before or during use of the P-02A, make sure that you read this manual and the place. Note that we cannot be held responsible for the unlikely event of loss of...
Page 3: Viewing/Searching This Manual
From the Tabs on the Cover described as “Osaifu-Keitai compatible i-αppli”. ≥Note that “P-02A” is referred to as “FOMA terminal” in this manual. Search from the tabs printed on the cover. ≥In the operating procedures of this manual, key operations are described with See the next page for details.
Page 4 How to search for “Alarm” is explained here as an example of search method. From the Index Additional guidance ..455 11P.542 Address link function ... 203 After-sales services .
Page 5: Using Alarm
Function name Menu number You can find this in (See page 34) Items shown on the Index. display (Some items cannot <Alarm> Function Menu while Alarm is Displayed be executed.) Using Alarm Edit Go to step 1 of “Using Alarm” on page 402. You can set Alarm to alert you at the specified time with an alarm tone, Operation and Detail...
Page 6: Easy Search
Easy Search To retrieve a desired function with simple words, refer to the following: To know convenient functions for making calls To change/know display settings To/Not to notify your phone number to the other party To know the meaning of marks (icons) on the display .....<Display> 27 ..................<Caller ID Notification>...
Page 7 To use the FOMA terminal with a sense of security Other things you can do To lock the FOMA terminal from away when it gets lost To reduce the battery consumption ......<Power Saver Mode> 113 ※1 ..................<Omakase Lock> To scan QR codes or bar codes ........
Page 8: Table Of Contents
Contents ......6 Accessories and Main Options ..20 Early Warning “Area Mail”, Chat Mail, SMS, Web Mail, Main Functions of P-02A... .8 etc. i-mode, iMenu, My Menu,...
Page 9 PC Connection Notify of Location, Location History, GPS Settings Data Transfer (OBEX™ Communication), Preparation Flow for Data Communication, AT Command, CD-ROM, DOCOMO Keitai Datalink Picture Viewer, i-motion Player, Video Player, Function List, Options and Related Devices, Appendix/ Chara-den, Machi-chara, Melody Player, Kisekae Tool,...
Page 10: Main Functions Of P-02A
Main Functions of P-02A ◆i-concier 11P.211 ◆1Seg 11P.250 i-concier is a service that enables you to receive useful information from a character You can watch 1Seg programs of the terrestrial digital broadcasting for mobile objects. (Machi-chara image) on the Stand-by display and download schedule event Also, you can record a still image or video while watching a 1Seg program.
Page 11 ◆Yuttari 11P.61 11P.25 Talk ◆Speed Selector By the rotating operation, you can scroll displays and select items quickly. Further, in You can slow down the other party’s speaking speed during a call. various situation, you can comfortably operate functions such as volume adjustment during music playback or during a call, and zoom adjustment for when shooting with the camera.
Page 12: Precautions
■The following symbols show specific directions: Precautions ALWAYS FOLLOW THESE DIRECTIONS ■Before using the FOMA terminal, read these safety precautions carefully so that Denotes things not to do. (Prohibition) you can use it correctly. Don’t After reading the precautions, keep them in a safe place. ■Be sure to observe these safety precautions because they are designed to protect you or those around you from causing injury and to avoid unnecessary Denotes not to disassemble.
Page 13 Be careful not to let General precautions for FOMA batteries and adapters/chargers electroconductive materials terminal, batteries, adapters/ specified by NTT DOCOMO, INC. (metal pieces, pencil leads etc.) chargers, and UIM Don’t If you use any type of battery, adapter or...
Page 14 Do not allow liquids such as Precautions for FOMA terminal Caution water, or foreign materials such as metal pieces or flammable Don’t Warning materials to get into the UIM or Do not place the FOMA terminal microSD card slot of the FOMA or accessories on unstable terminal.
Page 15 For those with weak heart Do not place magnetic cards or Caution conditions, the vibrator and ring similar objects near the FOMA volume must be adjusted carefully. terminal. Don’t Those functions may cause an effect on Magnetic data on cash cards, credit Do not swing the FOMA terminal the heart.
Page 16 Electronic devices in some types When you watch a 1Seg program, Do not pierce it with nails, hit it of cars can be affected by use of watch in a place bright enough with a hammer, or step on it. the FOMA terminal.
Page 17 AC adapter available overseas: 100 V to Don’t You might be struck by lighting or suffer such as a docomo shop or dispose of it 240 V AC an electric shock. in accordance with local waste disposal [Connect only to household AC outlet] regulations.
Page 18: Handling Precautions
When removing the adapter/ If you use an implanted cardiac Notes on using near electronic charger out of the outlet or pacemaker or implanted medical equipment cigarette lighter socket, do not defibrillator, use the mobile ■The description below meets “Guidelines on forcibly pull the adapter/charger phone 22 cm or more away from the Use of Radio-communication Equipment...
Page 19 ■Use a dry soft cloth such as the one for ■Do not use the FOMA terminal with the back Notes on handling the FOMA terminal cleaning glasses to clean the equipment. cover left removed. ■Avoid using in extremely high or low ≥The screen of the FOMA terminal sometimes has a The battery pack might come out, or malfunction or temperatures.
Page 20 UIMs to a handling counter such as ■During charging, the adapter/charger may Serial Port. With Audio, you might be able to a docomo shop. become warm. This is not an abnormality, so use Audio Video Remote Control. (Only with ■Avoid using in extremely high or low...
Page 21 Hands-free that you interference. will call him/her back, park your car to somewhere safe, 3. For further details, contact “docomo Information and then dial. Center” on the back page of this manual. ■Use the Bluetooth functions in Japan only.
Page 22: Accessories And Main Options
Accessories and Main Options <Accessories> <Main Options> ≥P-02A Handset ≥P-02A CD-ROM ≥FOMA AC Adapter 01/02 (With Warranty and Back Cover P30) The PDF versions of “Manual for PC Connection” (With Warranty and Instruction Manual) and “Kuten Code List” are included.
Page 23: Before Using The Handset
Before Using the Handset Part Names and Functions ......Opening/Closing FOMA Terminal......Navigation Displays and Key Operations .
Page 24: Part Names And Functions
Part Names and Functions < > ■For using earphone Flat plug of the Connect an optional connector-terminal-compatible earphone. When using a Flat-plug Earphone/ Microphone with Switch connector-terminal-non-compatible earphone, use an optional plug adapter for connection. ≥When inserting or pulling the plug adapter, take hold of the plug for the handset side and insert or pull it straight.
Page 25 1Light sensor >h Power/End key GInfrared data port ・ For sensing brightness (See page 114) ・ For ending calls ・ Used for infrared communication and the infrared ≥Do not cover the light sensor with your hands or do remote control. (See page 382 and page 386) ・...
Page 26: Opening/Closing Foma Terminal
Opening/Closing FOMA Terminal Navigation Displays and Key Operations Hold the FOMA terminal with both hands to slide the display upward/ When you want to execute the operation shown on the vertical display, downward. press the corresponding key as below. ≥While the horizontal display is shown, you can operate in the same way as on the Take care not to touch the keys when you open or close the FOMA vertical display depending on the function.
Page 27 ■Operating speed selector ・Adjusting zoom magnification when shooting with the camera (See page 238) ・Adjusting volume during music playback, etc. (See page 281) ・Switching the displayed still images (See page 345) ・ Moves the cursor or highlighted ・ Moves the cursor to the right. ・Adjusting volume during playback of movies, i-motion movies, etc.
Page 28: Main Key Operations From The Stand-By Display
Press and hold the key for at least Main Key Operations from the Stand-by Press the key for a short time operation one second Display Measures your current location and Enters “1”. executes the GPS function. From the Stand-by display, you can execute the following actions by (See page 326) operating each key: Enters “2”.
Page 29: Viewing Display
Viewing Display 3 5 8 ; < > Unread Messages R/F exist. During measuring the current location Battery level (estimate) (See page 42) (See page 177) (See page 326) (yellow) Radio waves reception level (estimate) Location Request Set. is set to “ON” or The area for Messages R/F in the FOMA “Reject numbers unset”, and it is within the Strong...
Page 30 During Lock All (See page 124) During Multitask (See page 401) The call cost has exceeded the specified limit. (See page 417) During Personal Data Lock (See page 127) Multiple functions are activated. An alarm is set. (See page 401) During Keypad Dial Lock (See page 131) (See page 264 and page 405) While watching a 1Seg program...
Page 31: Using Icons On Desktop
Missed call to Number B of 2in1 <Desktop Icon> Shows the Missed Call list. (See page 53) Using Icons on Desktop Record message Shows the Record Message list. (See page 70) Notification icon Videophone record message Status icon Desktop icon Shows the Videophone Record Message list.
Page 32 ※ The Phonebook could not be updated by Data Security Service Shows it on the PDF viewer. (See page 389) Shows the update display for Data Security Service. (See page 137) ※ Shows it on the ToruCa viewer. (See page 318) Provide Location was executed automatically Shows the Private menu.
Page 33 o to highlight an icon, and press Paste Icons to Desktop ≥Up to five “Desktop icons” You can paste up to 15 desktop icons of such as phone numbers, mail are displayed. If there are addresses, etc. six or more icons, “ ” and The display for an item to be pasted 1i( “...
Page 34: I-Widget Display And Operations
1Enter a title. Edit title <Icons> ≥You can enter up to 16 full-pitch/32 half-pitch characters. Displaying Description of Icons However, the number of characters for the title displayed when you highlight the icon is up to 11 full-pitch/ 22 half-pitch The symbols on the display (such as , and ) are called icons.
Page 35 Scroll Selection In this manual, the description of the speed selector operation (selection Select a main menu icon from the menu function o after selecting/entering a of top/bottom/left/right, and press of function item) is omitted. Scroll selection is explained below using the Select “Set./Service”...
Page 36: Alarm
Set or check the function Select a sub-menu item from the menu function Some menu items have even more detailed menus. Select “Talk” from “Set./Service”. The example below shows how to set “Low tone” for “Quality alarm”. ≥The highlighted item is the currently selected one.
Page 37: Function Menu
Description Example for Function Menu In this manual, the operation of the Function menu is described as Call up the function using the menu number follows: From the Stand-by display, press m75. Item displayed in the Function menu Delete all You can delete all files.
Page 38: When You Forget Key Operation
Item scroll <Guide> When menu items are listed over multiple pages, you can show the previous/next page When You Forget Key Operation o with the uppermost/lowermost item highlighted. You can press o to by pressing You can search for the functions you want to know and use, and then scroll through page by page.
Page 39: Using Uim (Foma Card)
Information Using UIM (FOMA Card) ≥Make sure that you insert/remove the UIM with the FOMA terminal closed and held in The UIM is an IC card that holds your information such as phone your hand. numbers. It can hold data such as Phonebook entries and SMS ≥Take care not to force the UIM into place because this can break it.
Page 40 ・PLMN setting ・PIN1 code, PIN2 code ・PIN1 code entry set types of data and files are displayed with the restrictions symbol, “ ”: ・Validating/Invalidating DOCOMO Certificate 1 and user certificate ・Videophone record messages ・Movie memos ・Screen memos ・Templates ・i-αppli programs ・Images...
Page 41: Attaching/Removing Battery Pack
≥If you lose your UIM (green/white) or have it stolen overseas, immediately contact “■Attaching”, and take hold of DOCOMO to take the steps necessary for suspending the use of the UIM. For inquiries, see “docomo Information Center” on the back page of this manual. Note...
Page 42: Charging
Standstill: Approx. 600 hours To prevent damage to the environment, bring used battery [Auto] In motion: Approx. 360 hours packs to a docomo service counter, a docomo agent or a 3G/GSM setting Standstill: Approx. 250 hours Li-ion 00 recycle center.
Page 43 If the symptom persists, troubles with the AC adapter, desktop holder or battery Plug the connector of AC pack may be involved, so consult a handling counter such as a docomo shop. Call/Charging ≥The charging confirmation tone (see page 107) sounds when charging starts and...
Page 44: Checking Battery Level
When charging only with the AC adapter <Battery Level> Insert the connector with the engraved Checking Battery Level Cover surface facing up until it clicks. Pull straight the connector out while pressing the When the FOMA terminal is turned on, an estimate of the battery level is release buttons.
Page 45: Turning Power On/Off
Check Welcome Mail <Power ON/OFF> デコメアニメ The mail messages “Welcome Turning Power ON/OFF (Welcome Decome-Anime )” and “緊急速報「エリアメール」のご案内 o twice (Introduction of Early Warning “Area Mail”)” have been saved by default. Press Turn Power On or perform step 1 on page 160 to show the Inbox list. Press and hold h for at least one Information second.
Page 46: Configuring Initial Setting
Set the size of characters. <Initial Setting> You can set the size of characters on the display at a time. (See page 119) Configuring Initial Setting Information If the date and time, Terminal Security Code, Keypad Sound, Speed ≥When an unset function is found, the Initial Setting display for the unset function Selector Sound, Location Request Set., or Font Size is not set, the Initial appears each time you turn on the power.
Page 47: Displaying World Time
Enter year, month, date and time. <World Time Watch> o to move the cursor and enter numbers by the Displaying World Time numeric keys. ≥To enter one-digit numeral for the date and time, enter You can display the time of the specified area on the Stand-by display. two digits beginning with “0”...
Page 48: Notifying The Other Party Of Your Phone Number
<Caller ID Notification> <Own Number> Notifying the Other Party of Your Phone Checking Your Own Phone Number Number ≥Your phone number (own number) is stored on the UIM. m1Phonebook1Own number You can set the FOMA terminal to send your phone number to the called party’s phone when dialing.
Page 49: Answer Setting
Voice/Videophone Calls/PushTalk Making Calls/Videophone Calls Using Public Mode..........If You could not Answer an Incoming Call .
Page 50: Making A Call/Videophone Call
This is the international standard for the third generation of mobile videophones. page 93. ≥P-02A supports only 64 kbps communication speed of the videophone. ≥Even when you are dialing within the same area, you You cannot talk on the videophone at 32 kbps communication speed.
Page 51 ≥During a videophone call, you can send a Chara-den image to the other party instead of the image through your camera. (See page 71) The digital communication ≥The international videophone call is available using the DOCOMO international call charging starts from this service “WORLD CALL”. (See page 58) display.
Page 52 If a videophone call could not be connected Auto-redialing The reason why it could not be connected is displayed. (The displayed reason might not If “Voice call auto redial” is set to “ON”, and a videophone call is not connected, a voice be the same as the actual reason depending on the type of the other party’s phone and call is automatically made.
Page 53: Switching A Voice/Videophone Call
Switching a Voice/Videophone Call Switch from a Videophone Call to a Voice Call When the other party’s phone has a function to switch between calls, you You (caller) can switch between a voice call and a videophone call. This can switch from a videophone call to a voice call by selecting “CHG to function is available for the mobile phones that can switch between a voice call”...
Page 54: Using Call Records
※ Received calls/missed calls of 64K data communication <Redial> <Dialed Calls> <Received Calls> Dialed calls of packet communication Using Call Records ※ Received calls/missed calls of packet communication The FOMA terminal can store the other party’s phone number and date/ Received calls of 64K data communication and packet time you have dialed or received.
Page 55 Information Use Received Calls ≥You can make a voice call to the most recently dialed or received number by pressing Press d from the Stand-by display and then ≥You can display the Received Call list also by ≥When you make/receive a call with an additional number of Multi Number, the stored m1Phonebook1Dialed/recv.
Page 56: Using Chaku-Moji
[Received Call list only] have set “Missed calls display” of “Ring time” to “Not display”, ≥For details on Chaku-moji or compatible models, refer to DOCOMO website or “Mobile the missed calls which stopped ringing within the ring start Phone User’s Guide [Network Services]”.
Page 57 Information Store Messages ≥When a Chaku-moji message has arrived at the other party’s phone, “Transmission You can store up to 10 Chaku-moji messages in the Message list. completed” is displayed, and you are charged a transmission fee. m1Set./Service1NW services1Chaku-moji ≥When a Chaku-moji message does not arrive at the other party’s phone such as when 1Create message the other party’s phone is not a Chaku-moji compatible mobile phone or the call is not 1Highlight <Not stored>...
Page 58: Setting Caller Id To Send/Not To Send For Each Call
Select a sent message. Prefer Chaku-moji ≥When the other party’s phone number is stored in the You can set how your FOMA terminal works for incoming Chaku-moji Phonebook, the phone number, name, and icon are messages for when “Setting when opened” is set to “Answer”. displayed.
Page 59: Sending Touch-Tone Signals
Set “Notify/Not Notify” by Entering “186/184” <Pause Dial> Sending Touch-tone Signals You can select whether to notify the other party of your phone number also by entering “186”/“184” before the other party’s phone number. You can send touch-tone signals from your FOMA terminal to use services such as reserving tickets, checking bank balance, etc.
Page 60: Making International Calls
≥Press l( ) to make an international videophone call. ≥Contact “docomo Information Center” on the back page of this manual for inquiries ≥When you select “Dial with orig. No.”, you can make a call without adding an about WORLD CALL.
Page 61: Setting For International Calls
International Dial Assist Country/Area Code You can make a call adding a country/area code or international call You can store up to 27 country/area codes to be added for making access code to a phone number. (Except for some countries and regions, international calls from overseas.
Page 62: Prefix Setting
)1Prefix numbers1Select a name 1Enter your Terminal Security Code1YES Delete all 1d or Information ≥Press l( ) to make a videophone call and press p to make a PushTalk <Delete this> <Delete all> ≥You cannot delete the country/area code or international call access code set by call.
Page 63: Making Voice Clear According To Surrounding Noise
Information <Hands-free> ≥The reconnectable time differs depending on the usage status and radio wave conditions. Switching to Hands-free An estimate is about 10 seconds and the call charge is applied also for that duration. ≥While you are disconnected, no sound is transmitted to the other party. When you switch to Hands-free, sound such as the other party’s voice is audible over the speaker.
Page 64: Receiving A Call/Videophone Call
For Answering a Voice Call Information ≥To connect using a cable (USB connection), set “USB mode setting” to Press d or ) to answer “Communication mode”. the call. ≥“ ” appears while you are talking or communicating using a USB Hands-free compatible device.
Page 65: Switched Between A Call And A Videophone Call By The Other Party
Information Display for incoming calls ≥You might hear beeps (in-call ring tone) during a call. When a caller’s phone number is provided If you have signed up for any of Voice Mail Service, Call Waiting Service, or Call If you store the caller’s name, phone number, and image in the Phonebook, the name, Forwarding Service and set “Arrival call act”...
Page 66: Setting Response Of Key Operation For Answering Incoming Calls
Quick silent Switched from a Voice Call to Videophone Call by the The following are the keys you can press to stop the ring tone, vibrator or voice Other Party guidance: When “Setting when opened” is set to “Keep ringing”, you can open the FOMA The display for switching to a terminal to stop the ring tone, vibrator or voice guidance.
Page 67: Setting Response For When Opening Foma Terminal During Ringing
<Setting when Opened> Set Response for when Closing FOMA Terminal during PushTalk Setting Response for when Opening m1Set./Service1Talk1Setting when closed FOMA Terminal during Ringing 1PushTalk1Speaker call or End the call m1Set./Service1Incoming call 1Setting when opened1Select an incoming type Information ≥This function is disabled when an earphone/microphone (option) is connected. The 1Keep ringing or Answer communication state does not change even if you close the FOMA terminal during a call.
Page 68: Setting Response For When Closing Foma Terminal During A Call
<Ring Volume> <On Hold> Adjusting Ring Volume Putting a Call on Hold when You cannot Answer Immediately You can adjust the ring volume for incoming calls and mail. m1Set./Service1Sound1Ring volume During ringing1h 1Select an incoming type The FOMA terminal makes three rapid beeps for confirmation and the call is put on o to adjust the volume.
Page 69: Setting Hold Tone
Press d or ) to release hold and answer Using Public Mode the call. ≥When you have put a voice call on hold, you can release the hold also by Using Public Mode (Drive Mode) pressing r. Public Mode is an auto-answer service that puts importance on manners ≥If a videophone call is on hold, the image through your camera is sent to the other in public spaces.
Page 70: If You Could Not Answer An Incoming Call
When Public Mode (Drive Mode) is activated When Public Mode (Power Off) is activated ・Even when a call comes in, the ring tone does not sound. The “Missed call” icon The setting stays activated until you dial “:25250” to deactivate Public Mode (Power appears on the display and the call is stored in “Received calls”.
Page 71 Incoming calls when Record Message Setting is set to “ON” <Record Message Setting> Recording Voice/Video Messages when You cannot Answer a Call By activating Record Message, you can play back an answer message to incoming calls and record callers’ voice/video messages when you The ring time elapses cannot answer them even if you have not signed up for Voice Mail...
Page 72: Recording Voice/Video Messages When You Cannot Answer A Call
Information <Play/Erase Messages> ≥When Voice Mail Service or Call Forwarding Service is set at the same time as <Play/Erase Videophone Messages> Record Message, the priority depends on the ring time set for Voice Mail Service or Playing/Erasing Record Messages/a Voice Call Forwarding Service.
Page 73: Using Chara-Den
Erase rec. msg. You can erase all record messages from the Record Message To skip to next message list, and can erase all videophone record messages from the Each time you press > during playback, messages are played back in the following Videophone Record Message list.
Page 74: Useful Functions For Videophone Calls
Substitute Image Useful Functions for Videophone Calls You can set a Chara-den image for “Substitute image” of “Select image”. Switching Cameras Chara-den display/Chara-den list/Chara-den Recording At videophone start-up Inside camera display1i( )1Substitute image ≥From the Chara-den list, you can set it also by pressing m( You can switch images to be sent to the other party from through the inside camera to through the outside camera.
Page 75 Switch Image Display Positions Zoom You can switch the display locations of the received image and the sent At videophone start-up WIDE image. You can adjust the magnification for the camera image to be sent to the During a videophone call, press c( other party.
Page 76: Setting Hands-Free Videophone
Brightness You can adjust the brightness of the camera image to be sent <Hands-free with Videophone> to other party to -3 (dark) through +3 (bright). At videophone Setting Hands-free Videophone 1Select a brightness level. start-up You can set whether to switch to Hands-free automatically for when a videophone call starts.
Page 77: Changing Image Displays For Videophone Calls
<Select Image> Set by Call Changing Image Displays for Videophone You can set an image to be sent to the other party for making a videophone call. Calls Enter a phone number You can set an image to be sent to the other party. m1Set./Service1Videophone1Select image call up the detailed display of a Phonebook entry, redial 1Select an item.
Page 78: Setting For Switching A Voice/Videophone Call During A Call
1YES1OK Indication OFF ≥You can use “ドコモテレビ電話ソフト (DOCOMO Videophone Software)” for the Check indication You can check the setting of the function. application program that supports this function.
Page 79: Checking Inside Of A Room When You Are Out
<Remote Monitoring> Function Menu of the Other ID List Checking inside of a Room when You are Look-up address You can call up a phone number in the Phonebook, Dialed Calls, or Received Calls to enter it. 1Select an item. You can use the inside camera of the FOMA terminal as a monitoring Phonebook camera to observe the remote location from a phone that has the...
Page 80: Pushtalk
“Other ID”, Remote Monitoring starts after the set ring time, ≥For details on PushTalk or compatible models, refer to DOCOMO website or “Mobile even when “Ring time”, “Auto answer setting”, or “Record message setting” is set and Phone User’s Guide [Network Services]”.
Page 81 When the other party answers, talk Information while pressing p. ≥Whether to notify others of your phone number when you make PushTalk calls follows the setting for “Activate” of “Caller ID notification” (see page 46). However, when you When the other party answers, a confirmation tone for set “Notify caller ID”...
Page 82 The state is other than above: the member does not answer, has Blue Calling ended the PushTalk call, or does not use a DOCOMO mobile Green You can get the talker’s right. phone. Blinking in green You have the talker’s right.
Page 83: Adding A Member During A Pushtalk Call
Information Adding a Member during a PushTalk Call ≥For a member who uses a PushTalk compatible model which does not have this function, the members added during PushTalk communication are not shown and a You can make a PushTalk call to another member during PushTalk confirmation tone does not sound.
Page 84: Adding Entries To Pushtalk Phonebook
Press h to end the communication after talking. Information ≥See page 86 for how to respond to the PushTalk call during i-mode communication. A tone for confirming the end of communication sounds at the other end. ≥When a call you received is a group call, the PushTalk communication itself ≥When a PushTalk call comes in during Lock All or Omakase Lock, “...
Page 85: Making A Call From Pushtalk Phonebook
1Select a search method. View call records You can access a dialed call record or received call record to Search store it in the PushTalk Phonebook. You cannot store in the Reading? . . See page 94. PushTalk Phonebook from the dialed/received call record of the Group? .
Page 86 Put a check mark for members you Edit group members You can edit the members in the group. want to make a call to [Group list/Member Go to step 2 on page 83. list] 1p or l( 1Enter a group name. Edit group name ≥When you do not check any members, the call is made ≥You can enter up to 16 full-pitch/32 half-pitch characters.
Page 87: Deleting Pushtalk Phonebook Entries
<Delete from PushTalk Phonebook> Setting for Making/Receiving a PushTalk Deleting PushTalk Phonebook Entries Call m1Set./Service1PushTalk PushTalk Phonebook list1i( 1DEL from P-Talk PB1Do the following operations. 1Do the following operations. 1Select a deleting method. Auto answer setting 1Select an item. Delete this DEL from P-Talk PB ON .
Page 88 Information <Auto answer setting> ≥When you set to “ON”, calls are automatically answered even when the FOMA terminal is closed regardless of “Setting when closed”. ≥When you set to “ON”, calls are automatically answered after switching to Hands-free regardless of “Hands-free w/ PushTalk”. However, the FOMA terminal works following the setting of “Hands-free w/ PushTalk”...
Page 89 Phonebook Phonebooks Available for FOMA Terminal ....Storing Phonebook Entries ... .<Add to Phonebook> Storing Displayed Phone Number/Mail Address in Phonebook .
Page 90 FOMA terminal Phonebooks Available for FOMA Terminal Name ○ ○ Ring tone You can use two types of Phonebook, namely the Phonebook in the Vibrator FOMA terminal itself, and the Phonebook on the UIM. Illumination FOMA terminal Picture Number of entries 1,000 entries 50 entries Chara-den...
Page 91 Phone number You can store up to four phone numbers per Phonebook entry in Name You can enter the name of the person or company in kanji, the FOMA terminal. You can set an icon for each phone number hiragana, katakana, alphabetic characters, or numerals. to categorize mobile phone numbers, office phone numbers, and 1Enter a name.
Page 92 ..Select a piece of location information from Location History numerals or symbol characters. (see page 335) and store it. ≥When the mail address is “phone number@docomo.ne.jp”, Attach from image store the phone number only..Stores the location information from an image. Select a ≥For the FOMA terminal, you can set a secret code as well.
Page 93 Image The stored still image is displayed when you call up the Illumination You can set an illumination pattern for when a voice call or Phonebook entry. videophone call comes in from the person stored in the 1Select an item. Phonebook.
Page 94: Multitask
Answer You can set an answer message for Record Message by Storing Displayed Phone Number/Mail message Phonebook entry. Address in Phonebook 1Select answer message1Select an answer message. ≥To release the stored answer message, select “Release answer You can store the displayed or selected phone number, mail address, message”.
Page 95 Call up/Select an item to be stored1i( Information 1Add to phonebook ≥Characters that cannot be stored may be replaced by spaces or deleted, and then stored. ≥When you operate from the detailed mail display, select “Store” from the Function ≥You may not be able to store the information from some sites into the Phonebook. menu and then select “Add to phonebook”.
Page 96 Phone number? You can enter a part of the other party’s phone number and <Search Phonebook> search. You can search for the entry even from the middle of Dialing from Phonebooks phone number. 1Enter a part of the phone number1B You can retrieve stored Phonebook entries by eight search methods.
Page 97 About Phonebook List About the detailed display o to highlight a tab, then the detailed contents are displayed. When you search from “All?”, “Reading?”, “Group?”, or ≥For the Phonebook entry stored “Memory No.?”, the tabs appear on the top of the Phonebook Group Memory No.
Page 98 i-concier information Send Ir data ≥When you select a postal address and select “YES”, the GPS compatible i-αppli Send phonebook See page 384. program set by “Select map” of “GPS settings” starts to show the map. When you highlight a postal address and press l( ), the full display appears.
Page 99 Copy to phone See page 419. Information <Send to Bluetooth> Connect to Center See page 136. ≥You cannot send Phonebook entries from the UIM. Copy item ≥See page 421 for the Bluetooth function. Copy name You can copy the name of Phonebook entry. Function Menu of the Detailed Phonebook Display Copy phone number/ You can copy each item of Phonebook entry.
Page 100 ≥The secret code can be added only when the recipient’s mail address is in the form of o to highlight a phone ≥From the detailed display, press “phone number” or “phone number@docomo.ne.jp”. It cannot be added to any other number or mail address to be set with a secret code. form of mail address.
Page 101: Deleting Phonebook Entries
<Delete Data> <No. of Phonebook> Deleting Phonebook Entries Checking Phonebook Storage Status m1Phonebook1No. of phonebook Delete from the Detailed Phonebook Display Phone Detailed Phonebook display1i( )1Delete data Phonebook. . . The number of Phonebook entries stored in the FOMA terminal 1Do the following operations.
Page 102 Information Information ≥When the Phonebook entry contains multiple phone numbers, the first phone number ≥The voice dial name set by this function is effective only for calling up a voice dial will be dialed. entry. For the voice guidance function, the reading (name) stored in the Phonebook is read aloud.
Page 103: Voice Settings
Information Voice Settings ≥When you vocalize, keep your mouth away from the microphone about 10 cm. If your m1Set./Service1Other settings1Voice settings voice is too distant, it may be difficult to recognize your voice. 1Do the following operations. ≥Pronounce the voice dial name as clearly as possible. ≥Before and after voice production, avoid making the sounds unrelated to the voice dial Auto voice dial You can automatically make a call to the phone number...
Page 105 Sound/Screen/Light Settings Sound Settings Screen/Light Settings Changing Ring Tone....<Select Ring Tone> 104 Changing Displays ..... .<Display Setting> 111 Setting Sound Effects of Ring Tone or Melody Displaying an Image Stored in Phonebook during Ringing .
Page 106 Display Title Name of Lyricist/Composer <Select Ring Tone> Smart Beep ーー Changing Ring Tone Ukulele ーー Waterdrop ーー You can set a ring tone for each incoming type. ※ 3D sound is supported. See page 105 for 3D sound. If you select an i-motion movie, the i-motion movie and sound are played (Note) The names of lyricists and composers are described conforming to the JASRAC back for incoming calls/messages.
Page 107 Information <Melody Effect> ≥You can set the Call Receiving display by selecting “Phone” or “Videophone”, and Setting Sound Effects of Ring Tone or then by selecting “Select calling disp.”. Go to step 2 on page 112. Melody ≥You can set the Mail Receiving display by selecting “Mail”, “Chat mail”, “MessageR” or “MessageF”, and then by selecting “Select receiving disp.”.
Page 108 <Vibrator> <Voice Announce> Informing You of an Incoming Call by Using Recorded Sound as Ring Tone Vibration You can set the sound recorded with the FOMA terminal for a ring tone (including a ring tone for Number B of 2in1), On-hold tone/Holding tone, You can set the vibrator to notify you of incoming calls and mail.
Page 109 Information <Charge Sound> ≥Melody Call is not available for incoming videophone calls and PushTalk calls. Setting Charging-start/end Tones ≥When you select “YES” from the confirmation display asking whether to connect to the site, the line is connected to the i-mode site. You are not charged a packet The confirmation tone sounds twice when charging starts/ends.
Page 110 Information <Mail/Message Ring Time> ≥In the following cases, the tone sounds from the earphone when an earphone/microphone Setting Ring Time for Mail and Messages R/F is connected, and from the speaker when it is not connected, regardless of this setting: ・While watching a 1Seg program You can set the duration of the ring tone which sounds for incoming ・During playback of a video file...
Page 111 Information <Manner Mode Set> ≥In Manner Mode, if you try to play back a melody, the confirmation display appears Selecting Manner Mode Type asking whether to play it back. Select “YES” to play back the melody at the volume set for “Phone”...
Page 112 You can select from among standard “Manner mode” to inform you of Manner Super Original incoming calls or mail by the vibrator, “Super silent” to erase sounds Mode Silent ※7 including confirmation tones from the earpiece, or “Original” to Works with the same set value as ①. Timer recording alarm Silent customize operations.
Page 113 1Select a pattern. Selector sound When Calendar/Schedule is set ≥See page 107 for Speed Selector Sound. You can display schedule events of the day (up to 10) or 1Normal or Up Mic sensitiv. calendar in the set format on the Stand-by display. You can check the schedule events or calendar and can set schedule 1ON or OFF LV alarm tone...
Page 114 Not to display icons on the Stand-by display Set Displays for Dialing/Calling and Others Press h from the Stand-by display. You can set an image for the Dialing/Call Receiving display, Mail Calendar, schedule events, status icons, notification icons, and desktop icons are Sending/Mail Receiving display, and Checking display.
Page 115: Foma Terminal
Information Information ≥The images or ring tone set at purchase might be displayed or played back for ≥The priority order of displays for call receiving is as follows: “Picture for Phonebook incoming calls or messages, depending on the combination of this function and entry”...
Page 116 1Standard or Long time light Information Charging Standard ..Lights during charging in the same setting as ≥When you display the text of i-mode mail or Messages R/F, the lighting time varies it lights in ordinary time.
Page 117 ≥You cannot change the color for icons and images displayed in multiple colors, the DOCOMO pictograms, and the Internet web pages (sites) supporting i-mode. To switch View Blind on/off by pressing one key Press and hold 8 for at least one second.
Page 118 Information Information ≥The image you can set for “Customize” is a JPEG or GIF image whose size is ≥For the functions set by Kisekae Tool, each setting display is shown with “Follow Stand-by (480 x 854) or smaller and up to 300 Kbytes. Perform “Change size” or “Trim Kisekae Tool”...
Page 119 <Illumination> Setting Color of Call/Charging Indicator Information and Others ≥Even if you perform “Reset disp. /sound” or “Reset menu screen”, you cannot reset “Font size”. m1Set./Service1Illumination ≥Even if you execute “Reset menu screen”, the Main Menu items you have manually 1Do the following operations.
Page 120 Hourly illumination You can be notified of the specified time (every hour at 0 minutes) Incoming Illumination by the tone and light of the Call/Charging indicator. 1Select a pattern. You can set an illumination for each incoming type. OFF..The Call/Charging indicator does not light. m1Set./Service1Illumination1Incoming illumination Pattern 1.
Page 121: Changing Font Size
<Font> <Font Size> Changing Character Font Changing Font Size m1Set./Service1Display1Font m1Set./Service1Display1Font size 1Font 1, Font 2, or Font 3 1Do the following operations. Set at one time You can set all the changeable items such as font size at a time. Information 1Extra large, Large, Standard, or Small ≥Some characters are displayed in “Font 1”...
Page 122: Setting Clock Display
Dialed/recv. calls You can set the font size for the Redial, Dialed Calls, Received When “Select language” is set to “日本語 (Japanese)”, you can Calls, Sent Address and Received Address. Day of week select “日本語 (Japanese)” or “英語 (English)”. 1Large or Standard ≥If you set to “英語...
Page 123: Security Settings
Security Settings Security Code Restricting Outgoing/Incoming Calls or Messages Security Codes Used for FOMA Terminal ....122 Setting not to Display Redial/Received Calls Changing Terminal Security Code .
Page 124: Network Security Code
≥Take care not to let others know your security codes. Even if your security codes are ※For “My docomo” and “各種お申込・お手続き (Respective applications/ known and used by a third party, we at DOCOMO take no responsibility in any event procedures)”, see the inside of the back page of this manual.
Page 125 Wrong entry 3 times in succession 1Enter the PIN1 code. Enter PUK (PIN unblock code) ≥See page 122 for the PIN1 code. Entry OK Wrong entry 10 times in succession Consult the handling Set new PIN code counter of a docomo shop...
Page 126: Restricting Others From Using
Enter the new PIN1 code/PIN2 code again. Change PIN1 Code/Change PIN2 Code You need to have set “PIN1 code entry set” to “ON” to change the PIN1 code. <Lock All> m1Set./Service1Lock/Security1UIM setting Restricting Others from Using 1Enter your Terminal Security Code 1Change PIN1 code or Change PIN2 code If you set Lock All, you can do no operations other than answering calls and turning on/off the power.
Page 127 ≥Note that neither the UIM nor the microSD card is locked. service at the same time as applying for the suspension of the line or during suspension, or if you are a member of DOCOMO Premier Club. Further, if you have Information signed up for Keitai Anshin Pack (Mobile Phone Security Package), you can use ≥Even while another function is working, Omakase Lock applies after finishing that...
Page 128 During Self Mode, the caller hears the guidance to the effect that radio Including the functions which use personal information, you can set the waves do not reach or the power is turned off. If you use DOCOMO Voice following functions not to be used.
Page 129: Timer Lock On At Close
m1Set./Service1Lock/Security1Personal data lock <Lock Setting> 1Enter your Terminal Security Code. Setting a Variety of Locks “ ” appears and Personal Data Lock is set. ≥To release Personal Data Lock, perform the same operation. When Timer Lock Timer Lock ON At Close ON At Close is set, the display for releasing Personal Data Lock appears also by opening the FOMA terminal.
Page 130 PIM/IC Security Mode <Face Reader Setting> Using Face Reader You can set the way to release Personal Data Lock and IC Card Lock. m1Set./Service1Lock/Security1Lock setting You can store your face data files in Face Reader and use it for 1PIM/IC security mode authentication when releasing IC Card Lock or Personal Data Lock.
Page 131 Information Store ≥At shooting, the Call/Charging indicator flickers and the shutter tone sounds To use Face Reader, store 3 or more face data files. You can store up to regardless of the Manner Mode setting. The sound volume for shutter tone cannot be 10 face data files.
Page 132 Enter a new Face Reader Security Code (four to eight Recognition-failed Image digits)1YES The images not judged as yourself by Face Reader recognition operation are saved. You can use these images to specify who tried to illegally Use Face Reader to Release Lock access your data.
Page 133 Information When “Face reader security” is set to “High” ≥If you set Keypad Dial Lock, you can send mail only when the address is called up After you are successfully authenticated by Face Reader, your eye blinking is checked. from the Phonebook and when the address stored in the Phonebook is called up from Repeat blinking your eyes slowly.
Page 134 Key Lock Setting <Secret Mode> <Secret Data Only> Protecting Phonebook Entries and You can set whether to temporarily release Key Lock when you open the FOMA terminal. Schedule Events from Prying Eyes m1Set./Service1Lock/Security1Lock setting In ordinary mode, you cannot access/refer to Phonebook entries or 1Key lock setting1Select an item.
Page 135 Information <Mail Security> ≥When you make a call to the party stored as secret data, his/her name is not Setting not to Display Mail in Mailbox displayed but the phone number is displayed on the Dialing/Talking display. ≥If you call up a secret entry to make a call or send mail, the record is not stored in without Permission “Redial”, “Dialed calls”...
Page 136 Call Acceptance Information You can receive voice calls, videophone calls, and PushTalk calls only from specified ≥You can make emergency calls at 110/119/118 even if you set “Restrict dialing”. phone numbers. You can set only the calls you want to accept to be connected. You can ≥When a call comes in from the phone number set with “Call rejection”, or from other specify up to 20 phone numbers.
Page 137: Setting Response To Incoming Calls Without Caller Id
<Call Setting without ID> <Ring Time> Setting Response to Incoming Calls Delaying Start of Ringing Operation without Caller ID m1Set./Service1Incoming call1Ring time 1Do the following operations. You can set whether to receive (accept) or not to receive (reject) a voice call, videophone call, and PushTalk call depending on the reason for no caller ID.
Page 138: Using Data Security Service
, and schedule events (hereafter, “saved data files”) in your FOMA terminal to the DOCOMO’s Data Storage Center and You can reject voice calls, videophone calls, and PushTalk calls from the to restore them when you unexpectedly lose your handset or change party whose phone number is not stored in the Phonebook.
Page 139 Phonebook entry, by deleting them at the Data 自動お預かり／更新設定 (Automatic saving/Update settings) Storage Center of the PC site (My docomo). You can configure settings for Data Security Service. ≥The deletion of a whole Phonebook entry is reflected at the Data Storage Center.
Page 140 Information お預かりデータ確認 (Check saved data) ≥You cannot execute “Reset settings” during IC Card Lock while “PIM/IC security You can check the data files at the Data Storage Center. mode” is set to “Face reader” or “Double security”. m1i-concier1l(MENU)1設定 (Settings) ≥After you execute “Reset settings”, the i-Channel tickers are not displayed. Then, o to receive the latest when the information is automatically updated or you press 1お預かりデータ確認...
Page 141 Business Online downloading, you are charged an additional communication fee. From personal computers http://www.docomo.biz (in Japanese only) ≥After you execute “Initialize”, the i-Channel tickers are not displayed. Then, when the ※You may not be able to access due to system maintenance, etc.
Page 142: Other Security Settings
Reference Other Security Settings Functions/Service name If you want page Besides introduced in this chapter, the following functions/services for i-mode Disaster Message Board the Security Settings are available: Service Change Mail Address Reference Functions/Service name If you want page Spam Mail Prevention (Reject Mail with URL) IC Card Lock To protect the IC card function from...
Page 143 Mail i-mode Mail ......... . 142 Configuring Mail Settings Sorting Mail Automatically to Each Folder .
Page 144 Select the address field1Select an item. i-mode Mail Phonebook..Call up a Phonebook entry and select a phone number or Once you subscribe to i-mode, you can exchange e-mails over the mail address. Sent address .
Page 145 ) and select “Delete receiver” to delete number@docomo.ne.jp”. the selected mail address. Select “YES”. ≥If you store the secret code and send mail to a mail address other than that of DOCOMO ≥Press i( ) and select “Change rcv. type” to change mobile phones, you might not receive the error message for unknown address.
Page 146 Delete receiver You can delete the selected address when there are multiple Save template You can save the Deco-mail message you are creating as a addresses. template. 1YES 1YES ≥See page 201 when templates are stored to the maximum. 1Select a receiving type. Change rcv.
Page 147 Copy See page 436. From own number You can convert the location information stored in “Own number” into the URL, and paste it to the i-mode mail text. See page 436. 1Enter your Terminal Security Code1O Paste See page 436. 1YES Undo After entering or deleting characters, pasting data, or...
Page 148 Press Creating and Sending Deco-mail The Message Composition display is displayed. When editing an i-mode mail message, you can change the size of the Go to step 6 on page 142. font and the color of the background as well as inserting images, thus Information composing your own original mail.
Page 149 ■How to use Palette You can insert the image shot by the camera on the spot into Camera Press d from the Message Entry display to display Palette. the text of mail. ≥When the cursor is over the decorated character, the Palette 1Shoot a still image.
Page 150 You can set Font Color, Blink, Font Size, Word Alignment, You can make characters to be entered blink. Select area Select blink 1Enter text. Ticker and Swing over the selected text you have entered. You can also change the set decoration, add another The set characters are blinking.
Page 151 Information Creating and Sending Decome-Anime <Insert image> Decome-Anime is a mail service which enables you to create expressive ≥You can insert up to 20 types of images within 90 Kbytes in total. However, you can mail messages which have Flash movies with messages and images, insert up to 2 types of Flash movies.
Page 152 Select the text field1Phone or microSD 1Select a Decome-Anime template. The editing of the Decome-Anime message is completed. Go to step 6 on page 142. ≥When a Decome-Anime template is already selected, the Edit Decome-Anime display appears. Go to step 4. Information ≥You can show the preview of the Decome-Anime template by pressing ≥You cannot create a Decome-Anime message when sent mail messages in the...
Page 153 Operate att. file See page 144. <Template> Template You can read in a Decome-Anime template to create a Using a Template to Create Deco-mail/ Decome-Anime message. Decome-Anime 1Phone or microSD 1Select a Decome-Anime template. The template is the form data in which text and images are inserted. Go to step 4 on page 150.
Page 154 Save insert image You can save images inserted into the template or Deco-mail Function Menu of the Deco-mail Template List text, and set them as the Stand-by display and Wake-up display. 1Select an image1YES1Select a destination folder. Compose message You can create a Deco-mail message using the contents of Go to step 3 on page 199.
Page 155 transmission See page 387. When you show the Decome-Anime Playback display or preview Delete The animation is played back automatically. The effect tones may sound and the FOMA Delete this See page 152. terminal may vibrate for some Decome-Anime messages. Further, you can operate from Delete selected See page 152.
Page 156 ≥Select the attached Phonebook entry to display the details. FOMA terminal. (See page 373) Press i( ) or r to return to the former display. ≥If the receiving end is other than P-02A, the sent melody might not be played back Schedule 1Select a date1Select a schedule event1O correctly or the attachment might be deleted.
Page 157 Information Delete Attached File ≥You can automatically receive up to 100 Kbytes of an i-mode mail message including You can delete a selected attached file or all attached files. attached files. You can manually obtain the attached files in excess of 100 Kbytes Message Composition display1 from the i-mode Center.
Page 158 Display Newly Received i-mode Mail <Receive Option> Receiving i-mode Mail Selectively Reception Result display1Mail 1Select an i-mode mail message to be You can check the titles of i-mode mail messages held at the i-mode displayed. Center and select them to receive, or delete them at the Center before receiving.
Page 159 ≥Even if the i-mode mail text contains pasted data, you cannot quote it in your reply. ≥You cannot use this function to receive SMS messages. Use “Check new SMS” to Also, you cannot quote it when using the DOCOMO keitai datalink or infrared receive them.
Page 160 Center. ≥Even if the i-mode mail text contains pasted data, you cannot quote it in your forwarding mail. Also, you cannot quote it when using the DOCOMO keitai datalink or Detailed Received Mail display infrared communication function. See page 163 for pasted data.
Page 161 FOMA terminal depending on the file such as an invalid data file or ≥When the sender’s device is other than P-02A, the received melodies might not be whose size is too large. In that case, the confirmation display appears asking played back correctly.
Page 162 Select a mail message. Information ≥When you select an unread ≥You cannot save a melody in excess of 100 Kbytes to the FOMA terminal. mail message, “ (pink)” ≥You cannot save a Flash movie in excess of 100 Kbytes to the FOMA terminal. changes to “...
Page 163 Display Mail from Outbox Display Mail from Draft You can save up to 1,000 sent i-mode mail messages including SMS You can edit and send i-mode mail messages and SMS messages in the messages. Draft. You can save up to 20 i-mode mail messages including SMS You can check the sent i-mode mail messages and SMS messages.
Page 164 ■Inbox list and detailed Received Mail display How to See Inbox/Outbox/Draft List and Detailed Display ■Mail menu Icons might have the following marks: Unread mail messages or messages are stored in the Inbox. Failed-to-send mail messages are stored in the Outbox.
Page 165 4Subject <For Inbox list (Date+subject) (Date+sender/receiver)> The number of characters you can display on the list varies depending on the setting Attached file File with the UIM security of “Mail list display”, and “Mail” of “Font size”. When a file is attached, it is decreases by 1 full-pitch/2 half-pitch character/s as the icon is added at the top.
Page 166 ■Outbox list and detailed Sent Mail display 4Subject The number of characters you can display on the list varies depending on the setting of “Mail list display”, and “Mail” of “Font size”. When a file is attached, it is decreases by 1 full-pitch/2 half-pitch character/s as the icon is added at the top.
Page 167 “phone number@docomo.ne.jp”, the name is not displayed even when yesterday. “ ” appears “phone number@docomo.ne.jp” is stored in the mail address field in a Phonebook when the date/time is entry. Store the phone number part only to display the name. When a sender’s/ corrected.
Page 168 Re-sort in all You can resort mail messages in all Inbox/Outbox folders Managing Mail Messages following the sorting conditions specified by “Auto-sort”. 1YES Function Menu of the Inbox Folder List/Outbox Folder List ≥When the folder applied with Mail security (see page 166) is found, you need to enter your Terminal Security Code.
Page 169 Protect Information <Delete folder> Protect ON/OFF You can protect the mail message so that it is not ≥You cannot delete an i-αppli mail folder if corresponding mail-linked i-αppli exists. [Inbox/Outbox] overwritten and deleted. You can protect all the received If the software program does not exist, you can delete the i-αppli mail folder, but this and sent messages.
Page 170 Search sender/ You can retrieve mail messages with a mail address or Mail history You can display the history of sent/received mail from the Search receiver phone number of a sender or recipient. [Inbox/Outbox] sender or to the recipient being selected or displayed. Up [Inbox/Outbox] “Search sender”...
Page 171 Information No. of messages You can display the number of stored received mail messages, sent mail messages and draft mail messages. <Color label> ≥Color Label applied to the mail messages is released when they are copied to the Delete microSD card, copied/moved to the UIM, copied/moved from the UIM or sent via 1YES Delete this infrared rays or iC transmission.
Page 172 Move to trash You can move the mail to the “Trash box” folder. The mail Add to phonebook See page 92. [Received Mail only] messages moved to the “Trash box” folder are preferentially Auto-sort You can store a sender or subject as a sort condition. overwritten (deleted).
Page 173 Select a record to be displayed. <Sent Address> <Received Address> The detailed display of the Address list is displayed. Displaying Sent/Received Mail Record ≥With an SMS message for which the other party’s phone number is not notified, the reason for no caller ID is displayed. Sent and received i-mode mail messages and SMS messages are stored ≥To send i-mode mail to the displayed address, press ) and go to...
Page 174 Feel＊Mail The Feel＊Mail image is played back. See page 177 for Feel Auto-sort Storing [Received Address only] ＊Mail. You can specify a sort condition and folder from the detailed Sent/ ≥You can play back the Feel＊mail image also by pressing Received Mail display.
Page 175 1 Sort all ≥You can enter up to 50 half-pitch characters. 2 Subject sort ≥When the mail address is “phone number@docomo.ne.jp”, 3 Reply impossible/Send impossible 4 Address sort (Look-up address/Enter address) enter the phone number only. You can sort SMS messages 5 Address sort (Look-up mail group) as well if you enter the phone number only.
Page 176 Release selected You can select mail addresses or phone numbers, and <Mail Group> release the sort condition for them. (The items are deleted Creating Mail Group from the Auto-sort Setting display.) 1Put a check mark for mail addresses or phone numbers You can store mail addresses by group.
Page 177 Mail security See page 133. Function Menu of the Detailed Mail Group Display/Mail Group Address Confirmation Display Secret mail display See page 133. Auto color label You can specify the text color of the sender, received date/time Edit address Go to step 3 on page 174. and others on the Inbox list by mail address.
Page 178 Information Receiving display You can set whether to display the Message Receiving and Reception Result displays, even during operation of another <Set check new messages> function. ≥ If you do not want to receive Messages R and Messages F by “Check new 1Alarm preferred or Operation preferred messages”, change these settings to “...
Page 179 Information <Receive Message R/F> ≥You cannot paste the header, signature, and quotation marks to Decome-Anime Receiving Messages R/F Automatically messages and SMS messages. Message services automatically deliver information you want to your Feel＊Mail FOMA terminal. Feel＊Mail reproduces the atmosphere of a mail message by actions of When your FOMA terminal is in the service area, it receives Messages R/ 45 types of animated characters.
Page 180 Information <Display Message R/F> ≥When the FOMA terminal cannot receive any more Messages R/F, “ (dark blue)” or Reading Received Messages R/F “ (dark blue)” is displayed. Delete unnecessary Messages R/F, read unread Messages R/F or release protection. l1Inbox1MessageR or MessageF ≥When the icon “...
Page 181 2Received date and time Display all After you execute “Sort” or “Filter”, you can reset it and list all The list shows the time for the Message R/F received today, and shows the date for Messages R/F by “By date ↑”. the Message R/F received until yesterday.
Page 182 Add to phonebook See page 92. Receiving Early Warning “Area Mail” 1YES Delete When you receive an Area Mail message, the ring tone for Area Mail sounds. “Ring volume”, “Ring time”, and “Vibrator” follows the settings Early Warning “Area Mail” of “Mail”.
Page 183 Chat Member list Receive entry You can register Message IDs for the reports to be received other number@docomo.ne.jp”, store the phone number only. than emergency information. You can register up to 20 IDs. ≥You can enter up to 50 half-pitch characters.
Page 184 Chat group You can store the members stored in a chat group as chat Exchange Chat Mail Messages members. l1Chat mail 1Group list or Member list Group list ..You can select members by chat group. Member list .
Page 185 ■Chat Mail display Information 1Image ≥When the Inbox is full of unread or protected mail messages, you cannot exchange The image you have stored in Chat Group is chat mail messages. Delete unnecessary mail messages or read unread mail displayed. messages, or release the protection and then operate.
Page 186 Delete read mails You can delete all the received read chat mail messages and If you start Chat Mail from the desktop or Chat Group sent chat mail messages including secret mail and chat mail If you start Chat Mail from a mail address or from a chat group that is not stored in Chat messages failed to send.
Page 187 1Select the member name field1Enter a member’s name. stored in the Phonebook, the image is also set. ≥When the mail address is “phone number@docomo.ne.jp”, store the phone ≥You can enter up to four full-pitch/eight half-pitch characters. ≥Not to change the member’s name, go to the next step.
Page 188: Composing And Sending Sms
≥You can send and receive SMS messages to and from subscribers of overseas ≥When the sent mail messages exceed the maximum number of storage, they are carriers other than DOCOMO. For the countries and overseas carriers available for the deleted from the oldest one. However, protected sent mail messages are not deleted.
Page 189 Save You can save the SMS message you are composing or editing to Display Newly Received SMS Messages the Draft. Reception Result display1Mail ≥You cannot save the message when the address field and text field are blank. 1Select an SMS message to be SMS report req.
Page 190: Setting Sms
≥You can enter up to 20 half-pitch characters for the address. However, if “#” or but unsuccessfully delivered due to the out-of-service area, etc. “:” is included, you cannot set it for “International”. ≥You can reset User Setting to “DOCOMO” by Reset1Enter your Terminal l1SMS settings1SMS validity period Security Code1YES.
Page 191 i-mode/i-motion/i-Channel/i-concier i-mode ..........190 Setting i-mode Setting i-mode .
Page 192: I-Mode
i-mode <iMenu> Accessing Sites i-mode is the service that makes use of the display of the FOMA terminal supporting i-mode (i-mode phone) to enable you to use online services You can use a variety of services offered by IPs (Information Providers). such as site (program) access, Internet access, and i-mode mail.
Page 193: Viewing And Operating Sites
To obtain an SSL site (SSL page) Information ≥The iMenu in English differs slightly from the iMenu in Japanese. The display for establishing authentication appears. When obtaining is completed, the ≥Items such as Tokusuru Menu and News are not shown on the iMenu in English. SSL page appears and “...
Page 194: Flash Function
Information Information ≥When you display a page stored in cache, you cannot display text or settings you ≥Depending on the site, the display authenticating your user ID or password might entered when connected before. appear. Enter your user ID and password, and then select “OK”. ≥When Flash movies are displayed, the site behavior might differ from the one for ordinary sites.
Page 195 Reload The site contents will be updated with the latest information. Phone/Terminal and UIM ID Save image See page 199. When you select an item, the confirmation display might appear asking Compose message You can compose an i-mode mail message with the URL/ whether to send the Phone/Terminal and UIM ID.
Page 196: Displaying Most Recently Accessed Site
Information Reset Last URL <Compose message> You can initialize the URL of the page you viewed last time to the iMenu ≥The number of characters of the URL you can paste to the text is up to 256 half-pitch URL. characters.
Page 197: Changing I-Mode Password
≥Note that if you do not remember the i-mode password, you need to bring an automatically, starting from the oldest one. identification card such as your driver’s license to the handling counter of a docomo ≥When you newly enter a URL to access a site, that URL is saved as a different record shop.
Page 198: Saving Web Pages Or Sites For Quick Access
Information Function Menu of the URL History List ≥When the number of characters used for a URL exceeds 256 half-pitch characters Compose message You can compose an i-mode mail message with the (512 half-pitch characters for Full Browser), you cannot store it. highlighted URL pasted to the text.
Page 199: Saving Site Contents
transmission See page 387. Set as home URL You can store the site as Home URL of Full Browser. 1YES No. of bookmarks You can check the number of bookmarks stored in all folders. ≥You can operate this only from the Bookmark list of Full Delete all The folders are not deleted.
Page 200 Information Function Menu of the Screen Memo Folder List ≥Up to 11 full-pitch/22 half-pitch characters are stored for a title. For longer titles, the Operate folder excess characters are deleted. ≥If you save the data acquisition completion display, its data file is saved as well. (You Add folder See page 196.
Page 201 Function Menu of the Detailed Screen Memo Display <Save Image> Saving Images from Sites Compose message You can compose an i-mode mail message also by pressing ). (See page 193) You can save the image displayed on a site or screen memo, and then set it for the Stand-by display, Wake-up display, or another display.
Page 202: Saving Images From Sites
■The maximum downloadable size Information ≥Up to 36 half-pitch characters are saved for a file name. When the file name is not Categories Maximum size Maximum number of storable specified, a part of the downloaded URL or “imageXXX” (XXX denotes numerals) is ※1 Melody 100 Kbytes...
Page 203 Save1YES1Select a destination folder. Information Chara-den images, templates (Deco-mail), and schedule events are saved to the ≥You are separately charged a packet communication fee. FOMA terminal. When the data files are stored to the maximum Select “Phone” or “microSD” for Machi-chara images, Kisekae Tool files, and templates (Decome-Anime).
Page 204: Uploading Files To Sites
About “P-SQUARE” Operations from Highlighted Information You can download the pre-installed Chara-den images, Machi-chara You can easily make a call, send mail, display Internet web pages, start images, Kisekae Tool files, templates, dictionaries, and Deco-mail 1Seg, set TV Timer/Timer Recording using highlighted information pictograms from the “P-SQUARE”...
Page 205: Address Link Function
Check loc. info . . . Displays the details of the selected location information. ≥Even if i-mode mail text contains a link to start an i-αppli program, you cannot quote the link when forwarding or replying to. Also, you cannot quote it when using DOCOMO keitai datalink or infrared communication function.
Page 206: Setting I-Mode
Information <i-mode Settings> <Set image display> Setting i-mode ≥Even when “ON” is set, images might not be displayed correctly. In this case, “ ” is displayed. i1i-mode settings1Do the following operations. ≥When “OFF” is set, “ ” is displayed and the data file is not received. ≥If you change this setting, “Set image display”...
Page 207: Changing A Host From I-Mode (Isp Connection Communication)
Host name in the FOMA terminal at purchase. ≥You can enter up to 9 full-pitch/18 half-pitch characters. DOCOMO Certificate . . . Certificates required for connecting to the FirstPass Center or 1Enter a host number. Host number FirstPass sites; they are stored on the UIM (green/white).
Page 208: Setting Firstpass
<User Certificate> Access FirstPass Center Setting FirstPass You can perform user certificate operations on the site of the FirstPass Center site. User certificates verify that you have subscribed to the FOMA service. i1Operate certificate1User certificate1English Downloaded user certificates are stored on the UIM for the use on FirstPass sites.
Page 209: Changing Hosts For Certificate Issue
Enter your PIN2 code. Request Revocation of User Certificate ≥Enter your PIN2 code within 60 seconds. When the You can revoke the downloaded user certificate. code is not entered within 60 seconds, the connection is cut off as an error entry. Site display of the FirstPass Center1Other settings ≥See page 122 for PIN2 code.
Page 210: I-Motion
The data is deleted after playback, so ≥If your UIM is lost or stolen, “docomo Information Center” on the back page of this (cannot be you cannot play it back again or save it to the manual can revoke your user certificate.
Page 211: Downloading I-Motion From Sites
Information <Download i-motion> ≥Depending on the line speed, line state, or radio wave conditions, the playback during Downloading i-motion from Sites obtaining might be suspended or the images might be distorted. You can repeatedly play back the standard (normal) type of i-motion movies after obtaining, but cannot Play Back i-motion Obtained from a Site play back the streaming type of i-motion movies.
Page 212: Setting Automatic Replay Of I-Motion
Stand-by display by tickers. You can read it on list. the i-Channel list by pressing the i-Channel key. (See page 210) Further, two types of channels, “Basic channel” provided by DOCOMO Press and “Favorite channel” provided by IPs (Information Providers) are The Channel list appears regardless of the “Ticker ON/...

Docomo P-02A Instruction Manual

From Easy Search

Table of Contents

Before Using the Handset

Voice/Videophone Calls/Pushtalk

I-Mode/I-Motion/I-Channel/I-Concier

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for Docomo P-02A

Summary of Contents for Docomo P-02A

Table of Contents