Service And Repair - GM-Racing Mini B16 Instruction Manual

REFERENCES TO THE ARTR VERSION
The ARTR version of the Mini B16 is pre-mounted, so only the remote control plant, motor and the electronic speed
control have to be inserted.
SERVICE
In addition to the already described service work should always try your vehicle in good condition to prevent wear. If dirt
apperas in moving parts, this can affect the performance of the model signifi cantly. Remove dirt or dust with compressed
air, a soft brush and / or with a toothbrush. If possible, try using no solvents, as this attains dirt in the camps and in the
normally inaccessible places and thus cause additional wear. We recommend the following simple procedures:
• Remove dirt and dust as far as possible with the methods described above.
• Check the car on worn, broken or gripping parts and repair them if necessary.
• Check regularly the fi xed seating all screws and tighten them if necessary.

SERVICE AND REPAIR

In problem cases, or for questions and repairs, please contact:
GRAUPNER-Service, Henriettenstrasse 94-96, D-73230 Kirchheim/Teck,
Tel. +49/1805/472876
TROUBLE SHOOTING MINI B16 - ST16
You fi nd the newest version of this manual on www.graupner.de
GM-Racing Mini B16 - ST16 08