General
Drives
Diskette Drive
SATA Operation
SMART Reporting
Drives
System Configuration
Integrated NICs
USB Controller
70
•
USB Device
Determines how the BIOS configures floppy drives
•
Disabled
•
Enabled (default)
Configures the operating mode of the integrated hard-drive
controller.
•
RAID Autodetect / AHCI
•
RAID Autodetect / ATA
•
RAID On (default)
Controls if hard drive errors for integrated drives are reported
during start up.
Enable Smart Reporting — Disabled by default
These fields let you enable or disable various drives in the
computer:
•
SATA-0
•
SATA-1
•
SATA-2
•
SATA-3
•
SATA-4
•
SATA-5
Enables or disables the integrated network card. You can set the
integrated NIC to:
•
Disable
•
Enable (default)
•
Enabled with PXE
Enables or disables the integrated USB controller.