Dell Precision R5500 Owner's Manual page 60

3. Press the processor socket-release lever downwards and fix it under the tab in the
locked position.
4. Place the heat sink over the processor on the system board.
5. Tighten and secure the retaining screws on the heat sink.
6. Repeat steps 1 to 5 for the second processor.
7. Install the front chassis
8. Install the remote access host
9. Install the SAS controller
10. Install the video
11. Install the CMOS
12. Install the center riser
13. Install the power distribution
14. Install the card
15. Install the fan bracket.
16. Install the system
17. Install the control
18. Install the power
19. Install the SAS
20. Install the hard drive
21. Install the hard drive
22. Install the optical
23. Install the cooling
24. Install the cover.
25. Install the front
26. Follow the procedures in
Related Links
Removing the Processors and Heat Sink
60
assembly.
card.
card.
card.
battery.
board.
unit.
cages.
fans.
panel.
supply.
backplane.
assembly.
carrier.
drive.
shroud.
bezel.
After Working Inside Your Computer.