Control Panel
Removing the Control Panel
CAUTION: Two different Torx drivers are needed for the control panel
disassembly/reassembly, a T10 and T8.
1.
Follow the procedures in
2.
Remove the
front
3.
Remove the cover.
4.
Remove the
cooling
5.
Remove the
optical
6.
Remove the
hard drive
7.
Remove the
hard-drive
8.
Remove the
SAS
9.
Remove the
power
10. Locate and remove the torx screw securing the control panel.
11. Remove the control panel cables.
Before Working Inside Your
bezel.
shroud.
drive.
carrier.
assembly.
Backplane.
supply.
Computer.
10
27