Max Meyer LabelMax SP2 User Manual page 8

To close the cover, lift up the top cover to the ultimate angle then close the top cover
gently and it will be kept at a stop position between 1 and 2 for a while. Use both
hands to gently push down the top cover to close it and make sure the cover is
latched on both sides.
Note: DO NOT place your hands between top cover and lower cover while close the
top cover!
Fig. 2 Top cover is fully open and ready to close
Fig. 3 Use both hands to close the top cover
Do not force the cover! If you are not sure if top cover is fixed at stop position,
please do not push top cover to close it or the top cover will be damaged.
Please open the top cover to the ultimate angle to close the top cover again. Use
both hands to push top cover to close it.
8