Table of Contents
Advertisement
•
Place a roll of paper onto the center of the paper roll mount.
•
Feed the paper, printing side face up, through the Teflon bar and the paper
guide and pass over the platen.
•
Adjust the green center-biased paper guides to slightly touch the edges of the
label backing.
•
To close the printer top cover, lift the cover to the ultimate open angle then
use both hands to close the cover gently.
and make sure the cover latches securely.
Note:
Make sure hands are not placed between printer top cover and lower cover when
close the top cover. Do not free fall the top cover. Failure to securely close and lock
the cover will result in poor print quality.
Printer Top Cover
Paper Guide
Close the printer
top
cover slowly
Paper Roll Mount
Teflon Bar
Top Cover Open Lever
11
Advertisement
Table of Contents
