Set Black Mark Sensor As Media Sensor And Calibrate The Black Mark Sensor; Set Gap Sensor As Media Sensor And Calibrate The Gap Sensor - Max Meyer LabelMax SP2 User Manual

4.6 Set Black Mark Sensor as Media Sensor and Calibrate the
Black Mark Sensor
Please follow the steps as below.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns green/amber after 5 green blinks. (Any
green/amber will do during the 5 blinks).
The LED color will be changed as following:
Amber red (5 blinks)
blinks) red/amber (5 blinks)
4.7 Set Gap Sensor as Media Sensor and Calibrate the Gap
Sensor
Please follow the steps as below.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns red/amber after 5 green/amber blinks.
(Any red/amber will do during the 5 blinks).
The LED color will be changed as following:
Amber red (5 blinks)
blinks) red/amber (5 blinks)
amber (5 blinks) green (5 blinks)
solid green
amber (5 blinks) green (5 blinks)
solid green
green/amber (5
green/amber (5
17