Casio XJ-V1 User Manual page 41

Command List
Only the following functions are supported while the projector is turned off. Do not try to send any
other command to the projector.
Power on/off: Read
Power on: Write
Get light time: Read
Input of a valid signal must be in progress in order to use a command to turn on blank screen or
change the aspect ratio.
Power On/Off:
Input Switching: 0: Switches the input source to the
COMPUTER terminal and changes the
COMPUTER terminal setting to RGB.
1: Switches the input source to COMPUTER
terminal and changes the COMPUTER
terminal setting to component.
6: Switches the input source to COMPUTER
terminal and changes the COMPUTER
terminal setting to Auto.
7: Switches the input source to HDMI.
Blank Screen: Switches the blank screen on or off.
Volume: Specifies a value to adjust the volume level. This
setting is applied to the input source signal that is
currently being projected by the projector.
Color Mode: Selects the color mode.
Aspect Ratio: Specifies the aspect ratio.
Get Light Time: Gets the light time from the projector.
Eco Mode: Enter Eco Mode.
Freeze: Switches freeze on or off.
Keystone Correction:
Specifies the keystone correction setting as a value that
corresponds to the typical Setup Menu "Keystone
Correction" settings below.
0: Keystone Correction –60
60: Keystone Correction 0
120: Keystone Correction +60
Example: 65 here, specifies a setting equivalent to
Keystone Correction +5.
Function
R: Read enabled W: Write enabled
Command
RW
Name
PWR RW
SRC RW
BLK RW
VOL RW
PST RW
ARZ RW
LMP R
PMD RW
FRZ RW
KST RW
41
Setting Range
0: Off, 1: On
0: RGB, 1: Component,
6: Auto (RGB/Component),
7: HDMI
0: Off, 1: On
0 to 30
1: Graphics, 2: Theater,
3: Standard, 4: Blackboard,
5: Natural
0: Normal, 1: 16:9, 4: Full,
7: 16:10 (when RGB or HDMI
(PC) is selected for input)
1: 16:9, 2: Normal, 6: 4:3,
7: 16:10 (when Component or
HDMI (DTV) is selected for
input)
0- Unit: Hours
0: Off (Bright), 1: Off (Normal),
3: On (Manual 1),
4: On (Manual 2),
5: On (Manual 3),
6: On (Manual 4),
7: On (Manual 5)
0: Off, 1: On
0 to 120