Casio XJ-V1 User Manual page 21

Use this menu item:
Screen Settings 3
No Signal Screen
Screen Settings 3
Blank Screen
Screen Settings 3
Restore Menu Defaults
Input Settings 3
COMPUTER Terminal (RC)
Input Settings 3
RGB Level Adjust (R)
Input Settings 3
Signal Name Indicator
Input Settings 3
Restore Menu Defaults
Option Settings 1 3
Auto Adjust (R)
Option Settings 1 3
Eco Mode
Option Settings 1 3
Auto Power Off
Option Settings 1 3
Password
Option Settings 1 3
Direct Power On
Option Settings 1 3
Language
Option Settings 1 3
Restore Menu Defaults
Option Settings 2 3
High Altitude
To do this:
Select one of the following as the projection image whenever there is no input signal
being input to the projector: "Blue"* (blue screen), "Black" (black screen), "Logo"
(projector built-in logo).
Select one of the following as the projection image whenever the [BLANK] key is
pressed: "Blue"* (blue screen), "Black" (black screen), "Logo" (projector built-in
logo).
Return all of the items in the "Screen Settings" main menu to their initial defaults for
the currently projecting image source.
Specify the method to be used to identify the COMPUTER terminal input signal.
Auto*: Projector automatically identifies the COMPUTER terminal input signal.
RGB: Always assumes the COMPUTER terminal input signal is an RGB signal.
Component: Always assumes the COMPUTER terminal input signal is a component
video signal.
Specifies whether level adjustment of the input RGB signal is enabled (On*) or
disabled (Off). Leaving this setting "On" will normally optimize the projected image.
However, depending on the input signal, there may be cases when this setting does
not optimize the image and may even distort it. If this happens, change this setting to
"Off".
Specify whether the newly selected input signal type should be displayed (On*) or
not displayed (Off) when the [INPUT] key is pressed to change the input signal.
Return all of the items in the "Input Settings" main menu to their initial defaults for the
currently projecting image source.
Specify whether the projector should detect the RGB input signal type (resolution,
frequency) and adjust the projection image accordingly.
On*: Auto Adjust enabled.
Off: Auto Adjust disabled.
See "Eco Mode (ECO)" (page 15).
Specify the amount of time of projector operation and input signal inactivity to be
allowed before Auto Power Off is triggered to turn off projector power automatically.
Auto Power Off can be disabled, if you want.
5 min, 10 min*, 15 min, 20 min, 30 min: Time until Auto Power off is triggered.
Off: Disables Auto Power Off.
See "Password Protection" (page 23).
Enable (On) and disable (Off*) projector auto power on as soon as the projector's AC
power cord is plugged into a power outlet.
Specify the display language.
English, French, German, Italian, Spanish, Swedish, Portuguese, Dutch, Norwegian,
Polish, Finnish, Czech, Turkish, Russian, Lithuanian, Vietnamese, Thai, Malay,
Indonesian, Arabic, Chinese (Simplified), Chinese (Traditional), Korean, Japanese
Return all of the items in the "Option Settings 1" main menu to their initial defaults for
the currently projecting image source.
Turn the high-altitude fan speed setting on or off in accordance with the altitude of
the area where you are using the projector.
On: Select this setting when using the projector in a high altitude (1,500 to
3,000 meters / 5,000 to 10,000 feet above sea level) area where air is thin. This
setting increases cooling efficiency.
Off*: Select this setting at normal altitudes (up to 1,500 meters / 5,000 feet).
Important!
Do not use this projector at altitudes greater than 3,000 meters (10,000 feet)
above sea level.
21