Opening The Case - Origen ae S8 User Manual

1
ODD cage removal
Remove left / right 4 fixing screws
completely from the chassis.
2
bracket
ODD
Optical disc drive installation
Separate the existing plastic drive bezel from
your ODD. The disc tray should be ejected and
requires some upward force to the bezel.
Put your ODD in left / right ODD bracket and fix
screws like picture. After fixing screws, assemble
ODD bracket to chassis. Secure all fixing screws
and check the eject button function.

Opening the case

Remove the thumb screws
as indicated. Carefully raise
the p anel as shown (about
30mm is enough) and
out to remove. Reverse the
procedure to replace.
DO NOT force upwards
as this could cause
damage to the top panel.
disk drive
pull
Optical
5