Table of Contents
Advertisement
• Hi-Temp Wash
You can select this option with Pots & Pans, Normal or Glassware wash
cycles.
Note: Do not use this option with Rinse & Hold Cycle.
Note: When this option is selected, water temperature boosts up between
0
0
161
F-167
F. "HI-TEMP WASH" helps: kill bacteria, dissolve detergents,
remove sticky and greasy substances off the dishware and as well as
effective cleaning.
Note: Any interruption during wash and rinse cycles or if the incoming
water temperature is too low, proper water heating temperature cannot be
achieved and the Hi-Temp Wash heating temperature conditions may be
affected
10.3 Check List for Wash Process
1) Make sure all items are loaded in the racks and silverware basket properly.
Note: Do not load tall dishware or cookware items near middle spray
arm as they may block the spray arm from rotating.
2) Pour the proper amount of detergent into the detergent dispenser.
Note: If "RINSEÖ" indicator light display is "ON", it is indicating that it is
empty, add "Rinse Aid" agent at this time.
3) Close the door and latch properly.
4) If you need to use the "HI-TEMP WASH" option, you must do so before
selecting the wash cycle.
Note: This option can be selected only with Pots & Pans, Normal or
Glassware Wash Cycles except Rinse & Hold Cycle.
5) Select the desired wash cycle by matching the knob "Pointer" to cycle
"Dot". Once you are at this point, turn the power button "ON". You will
hear a "Click" and the wash process will begin at this time.
6) To turn the power off at the end of the cycle, simply press the "POWER"
button.
7) If you want to speed up the drying process after completion of the cycle,
keep the door open slightly to release the moist air.
Warning: Keep children away from the machine when the door is
opened to dry the dishware because the moist hot air exiting out of the
door may cause harm.
10.4 Canceling or Resetting Wash Cycle
Note: The dishwasher will release detergent automatically within a few
minutes when starting a wash. To avoid the "release of detergent" before
you cancel or reset the wash cycle, you must press "POWER" button
immediately.
23
Advertisement
Table of Contents
