Related Manuals for Haier DW-8888-08
Summary of Contents for Haier DW-8888-08
- Page 1 HAIER HOUSEHOLD ELECTRICAL DISHWASHER Service Manual PART# DW-8888-08 HAIER AMERICA TRADING, LLC www.haieramerica.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS PAGE Product Code Explanation and Series Introduction Features Specification Safety Precaution Warning and Conditions Net Dimension Installation And Accessory Parts Parts and Functions Function Schedule Program Indication Maintenances Service and Trouble Shooting Circuit Diagram Resistance Measurements and Codes... -
Page 3: Product Code Explanation And Series Introduction
1. PRODUCT CODE EXPLANATION AND SERIES INTRODUCTION Model Identification ESD 100 A: Energy star dishwasher B: Series of factory design Examples: ESD101 Energy star dishwasher, NO.101 2. FEATURES 2.1. Easy Control and Variety of Washing Mode. This model adopts mechanical controlling structure, with an integrated knob, thus variety of washing programs are available for selection by turning the knob. - Page 4 Sales bar code N°. Key-features Energy efficiency Class Energy Star Energy Star Washing efficiency Class Drying efficiency Class Noise level power / pressure dB(A) 56/- 56/- Energy consumption* kWh / year kWh/24h Water consumption* Gallon Duration of program (Based on 65° min.
- Page 5 Water drain hose / -hose support Drying system Condenser / Turbo Natural Natural vented Height adjustable feet n°. / max. Inches 4/-5/64 4/-5/64 Delay timer (from - to) Safety systems Child resistant door lock Anti flood system Waterproof anti leak system Water return protection Acqua Stop kit Programs...
-
Page 6: Safety Precaution
Information for importer 14,5m(84CBM) Truck load capacity Jumbo (120 CMB) Truck load capacity 40’ Container load capacity 40’ HC load capacity Max. Failure (12 Month after sales to end Pcs/% customer) Packing materials / Recycling symbols RezY RezY Carton (weight 9.93 9.93 Polistyren (Weight) - Page 7 When abnormal phenomenon appears, turn the power switch to “Off”, take off the power plug, or cut off the main power supply and get in touch with HAIER after-sales service center at once. Continually operation at abnormal state may cause electric shock or fire The draining hose should be as lateral as possible.
-
Page 8: Warning And Conditions
Cut off the power supply before cleaning or checking Electric shock or burn may occur by carelessness. Take off the power plug to prevent thunder. If the plug is in, it may cause fault fire. 5. WARNING AND CONDITIONS 1. shelf (The container which dishes are put in is called shelf) 2. - Page 9 3. Put in detergent 4. End of cycle 5. Weekly maintenance...
-
Page 11: Net Dimension
6. NET DIMENSION (INCH) 7. INSTALLATION AND ACCESSORY PARTS 7.1 Position the Appliance Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned on the right or the left to facilitate proper installation. - Page 12 7.3 Drain Hose Connection Insert the drain hose into a drainpipe with a minimum diameter of 1.57 inch ,or let it run into the sink, making sure to avoid bending or crimping it. Use the special plastic support that comes with the appliance (see Fig.2).
-
Page 13: Parts And Functions
8. PARTS AND FUNCTIONS 1. upper Sprayer 2. Deluxe 2 position adjustable Upper Rack with Stemware Holders. 3. Middle Spray Arm 4. Pressure Relief Valves (one located at the upper left corner (not shown) 5. Lower Rack 6. Removable Split Silverware Basket 7. - Page 14 Hi-Temp Wash Button Press "HI-TEMP WASH" button in to turn the "HI-TEMP WASH" option "ON". Press this button again to turn the "HI- TEMP WASH" option "OFF". “Rinse √” Indicator Light When "Rinse √ " indicator light is lit, this means the rinse aid detergent is empty in the rinse aid compartment.
- Page 15 Tips to avoid stain and films The following suggestions are recommended to prevent stains and films on dishware and utensils items: You must rinse all dishware, silverware, glassware and food containers immediately after use. Some citric based food products, coffee, tea and iron deposit in water can cause yellow or brown film to form on the inside surface it left on for a long time or if rinsed immediately.
- Page 16 Do not load tall dishware or cookware items near the middle spray arm. Move racks slowly in and out to avoid slamming the dishware items together. Make sure all dishware and glassware items are securely in place when loading to avoid falling over or striking against each other. Adjustable Upper Rack System The upper rack has two positions, which allow you to modify the rack system according to your current space needs.
- Page 17 3) To put both halves together again, use both hands to level the split baskets and sliding each hook into each elongated hole on both sides. Now, slide with light force to attach/lock by pushing it forward and pulling it towards you until both baskets snaps in easily. To avoid any type of injury, load knives and forks face down.
- Page 18 Note: Use only "Automatic Dishwasher Detergent" for your dishwasher. Other types of detergents that are not for dishwasher use may cause overusing and foaming. Do not use detergents that are dried, caked or moist. These types of detergents will not dissolve properly and will not clean effectively.
- Page 19 Note: A full dispenser should last approximately one month. If you want to adjust the amount of rinse agent dispensed, the dispenser has 1 to 6 levels that you can adjust to. Simply rotate the dial to your desire settings. Checking Water Temperature •...
- Page 20 Main Filter: The purpose of this filter is to trap food and soil particles. Coarse Filter: The purpose of this filter is to trap large items such as pieces of bone or glass that might clog the drain (attached to main filter). Fine Filter: The purpose of this filter is to trap and hold tiny soil and food residue and prevent it from being re-deposited on the dishes during a cycle.
-
Page 21: Function Schedule
and soil level. For your convenience, the dishwasher has Pots & Pans, Normal, Glassware and Rinse& Hold wash cycles that you can select from. 9. FUNCTION SCHEDULE Rapid Sani- Cycle Selection Deter- Rinse Cycle wash Description of Cycle wash Information gent button Pre-wash with cold... -
Page 22: Program Indication
finger. Run immediately after dishes are used. Pre-wash of dishes, pots and pans while Short cold wash to waiting for the prevent food residue Soak load to be from drying on the complete after dishes. the subsequent meal. 10. PROGRAM INDICATION 10.1 Selecting Wash Cycles Select the appropriate cycle based on the load and soil level. - Page 23 • Hi-Temp Wash You can select this option with Pots & Pans, Normal or Glassware wash cycles. Note: Do not use this option with Rinse & Hold Cycle. Note: When this option is selected, water temperature boosts up between F-167 F.
-
Page 24: Maintenances Service And Trouble Shooting
Once you have reset to a new wash cycle, you must refill the detergent compartment if it is open and empty because the detergent from previous wash cycle may have already been released. Follow the steps below to cancel or reset a wash cycle: 1) To cancel or reset a wash cycle, press "POWER"... - Page 25 11.2 Troubleshooting Analysis of common breakdowns • Door Switch trouble Whether door is closed Close the door Check if Replace it door flap is Dismantle the door case and use an avometer to Change the door switch measure if the two terminals of the door switch are on Cable or program...
- Page 26 • Water supply trouble Check: Whether water is flowing in the Turn on the stopcock hose, whether the stopcock is turned on Measure whether Whether solenoid solenoid valve is valve is working electrified Change the solenoid valve Check whether the water intake user’s water pressure velocity is too is too slow...
- Page 27 • Water Discharge Trouble Check: Whether the pipe work is in good Repair it condition Whether the discharge pump The pump is possibly is working damaged properly Whether the water level Replace the water level switch is switch damaged The position of the discharge pipe is probably too high...
- Page 28 • Heating trouble Check: Whether socket connector is Connect it well connected well Check the resistance Replace the heater between the heater resistors Check whether the circuit between the Replace the two terminals is temperature limiting open devices The cable or the controller board is suspected to be damaged...
- Page 29 • Overflow Trouble Check: Whether there is water in the A water leakage has bottom of the machine developed Whether the overflow switch Replace it works properly The controller board or the cable should be suspected damaged...
- Page 30 • Power Trouble Check: Check whether the power Connect it properly connector is in position Check whether the Cable or the controller board circuit between the should be suspected damaged two terminals is open Replace the power switch...
-
Page 31: Circuit Diagram
12. CIRCUIT DIAGRAM... -
Page 32: Resistance Measurements And Codes
ESD Service Information 1. Resistance Measurements Component Resistance Convection Dry Fan Motor Dispenser Door Solenoid Fill Valve Solenoid Heating Element 12-15 Pump Motor Temperature Sensor Approximately 1100 @ 70º F Upper Wash Valve 1061 Wash Motor – Single Direction Start Winding (A) - 25 Run Winding (M) - 17 2.