Sinarcam Multipurpose Digital Camera User Manual page 4

• You cannot use the printer port when AppleTalk is active. To turn off AppleTalk, switch to the
Finder application and select Chooser from the File menu. Click the " Inactive" radio button at the
bottom of the Chooser window and close the window. Start now the Sinarcam software.
• If the Sinarcam software gets no answer from the sinarcam body the following error message
appears:
• The sinarcam software supports CCD-backs and film holders. Click the appropriate radio button to
display either the color modes or the command buttons for taking the picture.
• To remotely set the aperture, you must connect the Aperture unit to the camera. Restart the
application. Note that the aperture slider will become active and displays the aperture range of the
selected lens. Note also that the " stop up" and " stop down" buttons are available when the aperture
unit is connected.
Sinarcam1UsersGuideE.rtf Date: 14.03.00 14:22