Sinar Lensboards - Sinarcam Multipurpose Digital Camera User Manual

8. Sinar Lensboards

For optimal focussing the aperture should always be fully open to allow best depth of field. With so
called manual lensboards, it is required to switch from the working aperture to fully open manually.
Automatic-lensboards for Sinaron digital- and Nikon- lenses allow you to control the aperture
automatically: By working with the Sinarcam compact in the live-video-mode, the lens will
automaticaly open up, to guarantee a optimal focussing with fully open aperture. By leaving the live-
mode to take a picture, the automatic-board will close down the aperture to the previous chosen
working aperture.
556.63.010
556.63.011
556.63.018
556.63.019
556.63.020
556.63.021
556.63.028
556.63.029
556.64.051
556.64.058
dig = digital
spec = special
man = manual
aut = automatic
• To control these lens-boards with auto aperture function, the Sinarcam is requiring the hardware-
version 1.4 and higher and the software-version 1.4 or higher.
• New, or with this funktion already updated Sinarcams are to identify by a dot on the left side of the
serial-no.
• The version of existing Sinarcams can easy be checked by starting the Sinarcam software and
opening the menu " Apel" and " about Sinarcam" .
• Sinarcams with the soft- and hardware-version 1.4 are available at December 97.
• Existing Sinarcams can be updated at Sinar for no charge, by ordering of a automatic-board,
(excl.shippment)
Sinarcam1UsersGuideE.rtf
Sinaron Bayonet Board dig man
Sinaron Bayonet Board dig aut
Sinaron Bajonetplatte spec man
Sinaron Bayonet Board spec aut
Nikon Bayonet Board dig man
Nikon Bayonet Board dig aut
Nikon Bayonet Board spec man
Nikon Bayonet Board spec aut
Hasselblad Shift Board dig man
Hasselblad Shift Board spec man
This lens-board is dedicated for the use of the Sinarcam compact unit,
when no slide-adapter 551.33.022 and no film is being used.
This lens-board is dedicated for the use with the Sinarcam slide-adapter
551.33.022 or by using film with the Sinarcam compact unit.
With this lens-board you are required to open up the lens aperture
manually while working in the live-video-mode of the Sinarcam compact
unit. By leaving the live-video-mode, you will have to manually stop down
the aperture back to the working aperture.
With this lens-board all the above described " man" operations will be
automatically set and controlled from the Sinarcam compact unit.
Date: 14.03.00 14:22