Setup The Sinarcam On A Sinar P2 View Camera - Sinarcam Multipurpose Digital Camera User Manual

9. Setup the Sinarcam on a sinar p2 view camera

To setup the camera, do the following:
• Attach the sinarcam body on a p2 bearer
•
Set all movements on the bearer into its click stops
•
Mount the Remote Aperture Control unit 551.33.003 to the front
standard
•
Mount the Sinaron Digital Lens to the front standard. To allow
the sinarcam software to automatically recognize the lens and
its aperture range, sinar recommends to use lens codes for all
of your lenses.
•
Add a bellow lens hood and a bellow hood mask
to the camera to reduce stray light
•
Move the vertical and horizontal shift of the front standard 24
mm to the right and 24 mm down in order to put the lens axis
exactly to the center of the CCD-sensor.
Sinarcam1UsersGuideE.rtf Date: 14.03.00 14:22