Shortcuts And Help; List Of Available Commands; List Of Sub-Commands Or Required User Input - ZyXEL Communications ZYWALL USG Series Reference Manual

Chapter 1 Command Line Interface

1.6 Shortcuts and Help

1.6.1 List of Available Commands

A list of valid commands can be found by typing
available commands within a command group, enter
Figure 9 Help: Available Commands Example 1
Router> ?
<cr>
apply
atse
clear
configure
------------------[Snip]--------------------
shutdown
telnet
test
traceroute
write
Router>
Figure 10 Help: Available Command Example 2
Router> show ?
<wlan ap interface>
aaa
access-page
account
ad-server
address-object
------------------[Snip]--------------------
wlan
workspace
zone
Router> show

1.6.2 List of Sub-commands or Required User Input

To view detailed help information for a command, enter
Figure 11 Help: Sub-command Information Example
Router(config)# ip telnet server ?
;
<cr>
port
rule
|
Router(config)# ip telnet server
Figure 12 Help: Required User Input Example
Router(config)# ip telnet server port ?
<1..65535>
Router(config)# ip telnet server port
28
or at the command prompt. To view a list of
? [TAB]
or
<command> ? <command>
<command> <sub command> ?
ZyWALL / USG (ZLD) CLI Reference Guide
.
[TAB]
.