ZyXEL Communications ZYWALL USG Series Reference Manual page 166

Chapter 25 Secure Policy
Table 85 Command Summary: Secure Policy (continued)
COMMAND
secure-policy6 zone_object {zone_object|ZyWALL} append
secure-policy6 zone_object {zone_object|ZyWALL} delete
<1..5000>
secure-policy6 zone_object {zone_object|ZyWALL} flush
secure-policy6 zone_object {zone_object|ZyWALL} insert
rule_number
secure-policy6 zone_object {zone_object|ZyWALL} move
rule_number to rule_number
[no] secure-policy6 activate
secure-policy6 append
secure-policy6 default-rule action {allow | deny |
reject} { no log | log [alert] }
secure-policy6 delete rule_number
secure-policy6 flush
secure-policy6 insert rule_number
secure-policy6 move rule_number to rule_number
show secure-policy6
show secure-policy6 rule_number
show secure-policy6 zone_object {zone_object|ZyWALL}
show secure-policy6 zone_object {zone_object|ZyWALL}
rule_number
show secure-policy6 status
show secure-policy6 block_rules
show secure-policy6 any ZyWALL
[no] secure-policy6 asymmetrical-route activate
session-status-update reply-time <5..300>
166
DESCRIPTION
Enters the IPv6 secure policy sub-command mode to
add a direction specific through-ZyWALL rule or to-
ZyWALL rule to the end of the global rule list. See
Table 86 on page 167 for the sub-commands.
Removes a direction specific IPv6 through-ZyWALL
rule or to-ZyWALL rule.
<1..5000>: the index number in a direction specific
firewall rule list.
Removes all direction specific IPv6 through-ZyWALL
rule or to-ZyWALL rules.
Enters the IPv6 secure policy sub-command mode to
add a direction specific through-ZyWALL rule or to-
ZyWALL rule before the specified rule number. See
Table 86 on page 167 for the sub-commands.
Moves a direction specific IPv6 through-ZyWALL rule
or to-ZyWALL rule to the number that you specified.
Enables the IPv6 secure policy on the ZyWALL / USG.
The command disables the IPv6 firewall.
no
Enters the IPv6 secure policy sub-command mode to
add a global firewall rule to the end of the global rule
list. See Table 86 on page 167
Sets how the IPv6 secure policy handles packets that
do not match any other secure policy rule.
Removes a IPv6 secure policy rule.
Removes all IPv6 secure policy rules.
Enters the IPv6 secure policy sub-command mode to
add a secure policy rule before the specified rule
number. See Table 86 on page 167
commands.
Moves a IPv6 secure policy rule to the number that
you specified.
Displays all IPv6 secure policy settings.
Displays a IPv6 secure policy rule's settings.
Displays all IPv6 secure policy rules settings for the
specified packet direction.
Displays a specified IPv6 secure policy rule's settings
for the specified packet direction.
Displays whether or not the IPv6 secure policy is
active, whether or not IPv6 asymmetrical route
topology is allowed, and the default IPv6 secure policy
rule's configuration.
Displays all the IPv6 secure policy rules that deny
access.
Shows all the IPv6 to-ZyWALL / USG secure policy
rules.
Allows or disallows asymmetrical route topology for
IPv6 traffic.
Set how many seconds the ZyWALL / USG will allow a
session to remain idle (without traffic) before closing
it.
ZyWALL / USG (ZLD) CLI Reference Guide
for the sub-commands.
for the sub-