General Operation - IBM 04N7322 Owner's Manual

3828TUO032A-1 99.5.31 1:35 PM ˘ ` A10

General Operation

After following the installation instructions and getting familiar with the
controls, you are ready to operate the monitor.
1. Turn on the monitor, PC and other peripherals you plan to use.
2. After the PC has booted (powered up and finished self-testing),
enter a software application that uses the full screen display.
3. While looking at the image on the screen, adjust the controls for
the image size, centering, brightness and contrast levels you
prefer.
4. This monitor is an auto scanning monitor, capable of synchronizing
with a variety of video standards automatically. The Scanning
Mode Table below indicates the resolution, as well as the horizontal
and vertical refresh rates, of some of the modes that this monitor
can match to the output of your PC's graphics card.
Other resolutions and standards can also be synchronized and
displays on this monitor as long as they are within the horizontal
and vertical frequency range of this monitor. See the specifications
for this information.
A10