Edit Frequency; Edit Tgid; Set Ctcss/Dcs; Channel Settings - Uniden BC346XT User Manual

Channel Settings

The following settings are available for channels.
Edit Name

Edit Frequency

Edit TGID

Set CTCSS/DCS

Set Number Tag
Set Modulation
Set Attenuator
Set Priority
Set Alert
Set Lockout
Volume Offset
Copy Channel
Delete Channel
New Channel
The specific settings available depend on the current system type.
See Channel Settings for details of the differences.
Note: The first Line in the display shows the name of the Channel in Menu Display.
Edit Name
You can provide a name for the channel.
Refer to FONT DATA for the characters that can be entered.
Press [E / yes / gps] to accept the name entered. The scanner returns to the previous menu.
Edit Frequency
If you select to edit the frequency, the scanner displays the current frequency in edit mode.
See Edit Frequency.
Edit TGID
If you select to edit the TGID, the scanner displays the current ID. You can use the keypad to change the ID.
When you press [E / yes / gps] to accept, the scanner checks for valid data and returns to the previous
menu.
If the ID is invalid, the scanner shows "Bad TGID" and "Press Any Key" and sounds an error tone. Press any
key to return to the editing state.
Thursday, May 14, 2009
58