Uniden BC346XT User Manual page 241

<COMMAND SCO>
Get/Set Search/Close Call Settings
Controller → Radio
SCO[\r]
SCO,[RSV],[MOD],[ATT],[DLY],[RSV],[CODE_SRCH],[BSC],[REP],[RSV],[RSV],
[MAX_STORE],[RSV],[RSV],[RSV],[RSV][\r]
Radio → Controller
SCO,[RSV],[MOD],[ATT],[DLY],[RSV],[CODE_SRCH],[BSC],[REP],[RSV],[RSV],
[MAX_STORE],[RSV],[RSV],[RSV],[RSV] [\r]
SCO,OK[\r]
[MOD]
[ATT]
[DLY]
[CODE_SRCH] : CTCSS/DCS Search
[BSC]
[REP]
[MAX_STORE] : Max Auto Store
Get/Set Search/Close Call Settings.
In set command, only "," parameters are not changed.
The set command is aborted if any format error is detected.
This command is only acceptable in Programming Mode.
<COMMAND BBS>
Get/Set Broadcast Screen Band Settings
Controller → Radio
BBS,[INDEX][\r]
BBS,[INDEX],[LIMIT_L],[LIMIT_H][\r]
Radio → Controller
BBS,[LIMIT_L],[LIMIT_H][\r]
BBS,OK[\r]
[INDEX]
[LIMIT_L]
[LIMIT_H]
Get/Set Broadcast Screen Band Settings. This command is only acceptable in
Programming Mode.
: Modulation
: Attenuation
: Delay Time
(0:OFF / 1: CTCSS/DCS Search)
: Broadcast Screen
(each # is 0 or 1)
0 means OFF
1 means ON
: Repeater Find
: Index
: Lower Limit Frequency
: Upper Limit Frequency
(AUTO/AM/FM/NFM/WFM/FMB)
(0:OFF / 1:ON)
(-10,-5,-2,0,1,2,5,10,30)
(16digit: ########･･#)
||||||||･･+- Band10
|||||||
||||||+---- Band 2
||||||+----- Band 1
|||||+------ Reserve
||||+------- NOAA WX
|||+-------- VHF TV
||+--------- UHF TV
|+---------- FM
+----------- Pager
(0:OFF / 1:ON)
(1-256)
(1-9,0 means 10)
(00000000 –99999999)
(00000000 –99999999)
241
: