Uniden BC346XT User Manual page 199

[ EDACS SYSTEM ]
<AFS format>
Display Format
1) AA-FFS
2) AA---- Partial ID (free FLEET and SUB-FLEET)
3) AA-FF-
Input Format
1) AA-FFS
2) AA-
3) AA-FF
Range
AA : AGENCY
FF : FLEET
S : SUB-FLEET
Note
 Both AFS and Decimal Format are valid to input regardless of AFS setting.
 Display Format depends on AFS/Decimal setting except for I-CALL ID.
 Use Decimal format when I-CALL is needed.
 I-CALL format is always shown in Decimal Format regardless of AFS setting.
 AFS format cannot support I-CALL ID format.
 Display Format is also valid in remote command input.
Normal ID
AA is 2 digits (0 filling)
FF is 2 digits (0 filling)
S is 1 digit
AA is 2 digits (0 filling)
Partial ID (free SUB-FLEET)
AA is 2 digits (0 filling)
FF is 2 digits (0 filling)
Normal ID
AA should be 2 digits (0 filling)
FF should be 2 digits (0 filling)
S should be 1 digit
Partial ID (free FLEET and SUB-FLEET)
AA should be 2 digits (0 filling)
Partial ID (free SUB-FLEET)
AA should be 2 digits (0 filling)
FF should be 2 digits (0 filling)
2digits (00-15)
2digits (00-15)
1digit (0-7)
*ALL0(00-00-0) is invalid
199