Uniden BC346XT User Manual page 245

<COMMAND SSP>
Get/Set Service Search Settings
Controller → Radio
SSP,[SRCH_INDEX][\r]
SSP,[SRCH_INDEX],[DLY],[ATT],[HLD],[LOUT],[QUICK_KEY],[START_KEY],[RSV],
[NUMBER_TAG],[RSV],[RSV],[RSV] [\r]
Radio → Controller
SSP,[SRCH_INDEX],[DLY],[ATT],[HLD],[LOUT],[QUICK_KEY],[START_KEY],[RSV],
[NUMBER_TAG],[RSV],[RSV],[RSV] [\r]
SSP,OK[\r]
[SRCH_INDEX]
[DLY]
[ATT]
[HLD]
[LOUT]
[QUICK_KEY]
[START_KEY]
[NUMBER_TAG]
The set command is aborted if any format error is detected.
This command is only acceptable in Programming Mode.
<COMMAND CSG>
Get/Set Custom Search Group
Controller → Radio
CSG[\r]
CSG,##########[\r]
Radio → Controller
CSG,##########[\r]
CSG,OK[\r]
########## (each # is 0 or 1) :
The Order of Range is as same as LCD Icon (1 – 10).
Get/Set current status of the custom search range.
This command is only acceptable in Programming Mode.
*It can not set all Custom Search Ranges to "0".
: Service Search Range
1 : Public Safety 6 : Air
2 : News
3 : HAM Radio
4 : Marine
5 : Railroad
: Delay Time
: Attenuation
: System Hold Time for Search with Scan(0-255)
: Lockout for Search with Scan(0:Unlocked/1:Lockout)
: Quick Key
: Startup Configuration Key
: Number tag
: Status of Each Search Range
245
7 : CB Radio
8 : FRS/GMRS/MURS
9 : Racing
11 : FM Broadcast
(-10,-5,-2,0,1,2,5,10,30)
(0:OFF/1:ON)
( 0 – 99 / .(dot) )
( 0 – 9 / .(dot) )
(0-999 / NONE)
0 : valid / 1 : invalid
12 : Special