Quick Save - Uniden BC346XT User Manual

Quick Save

Press [E / yes / gps] without entering data to quickly store the held frequency.
This Quick Save function is almost the same as Direct Entry.
(See: Direct Entry for details.)
The name of the stored frequency is the frequency when the scanner is not receiving location data from a
GPS unit.
If you store the detected frequency while receiving location data from a GPS unit, the channel name of the
stored frequency becomes the current Latitude/Longitude data.
The channel name format depends on the format set in Set Pos Format.
"DMS:DDD°MM'SS.ss" is set
If the latitude data is "32°57'33.60 N" and the longitude data is "97°05'34.18 W", the channel name
becomes "3257.33-09705.34".
"DEG:DD.dddddd" is set
If the latitude data is "32.959333 N" and the longitude data is "097.092827 W", the channel name
becomes "32.9593-097.0928".
Thursday, May 14, 2009
143