Key Safe Operation; Key Safe Message - Uniden BC346XT User Manual

Key Safe Operation

Turns on power while pressing and holding [FUNC] key to go to the LAST MODE* in Key Safe Mode.
The scanner displays the "Key Safe Mode On" message after displaying the copyright message.
In Key Safe Mode, the on power supply while pressing and holding [FUNC] key to return to LAST MODE* in
Full Operation. The scanner displays the "Key Safe Mode Off" message after displaying the copyright
message.
If you try to set this function and Startup Key Operation together by pressing and holding [FUNC] key and
the number key, the scanner does not set Key Safe Operation.
LAST MODE means the mode when the scanner is turned off. It resumes Scan Mode, Custom/Service/Quick
Search Mode, Weather Mode, Close Call Only, Tone-Out Mode, each Hold Mode, GPS Mode and Band
Scope Mode for LAST MODE.
In ID Search Hold Mode if ID has already been registered, LAST MODE will be ID Search Hold Mode. If ID has
not been registered yet, LAST MODE will be Scan Mode.
Review Location Mode is set to normal Scanner Mode (not GPS Mode).

Key Safe Message

If you try to change a parameter or change to another mode, the scanner displays the following message
and sounds an Error Tone.
Key Safe Mode
Press FUNC whi le
Power On for
Full Operati on
188