Installation - Kruger KH 300 User Manual

INSTALLATION

Unplug the appliance from the power supply before servicing.
NOTE: This procedure will require 2 people for easier installation.
Please read all instructions carefully before installing.
1. If you are renovating your kitchen, be careful to protect your range hood. Volatile gases from building
materials, dust, paint and coatings can corrode and tarnish the surface of your range hood. Instead, install your
range hood after your kitchen renovation is complete.
2. The stainless steel may have very sharp edges; wear protective gloves when removing the range hood for
installing, cleaning or servicing.
3. Be careful not to damage any hidden wire sets when drilling into a wall. Unplug the range hood from the power
supply before installation; the main power box should be switched off.
4. If it is needed to move the gas stove before installing the range hood, switch off the gas valve entirely before
moving the gas stove.
5. Always use a power socket with reliable grounding. Half-way links of the power line, the use of extension cords
and multi-port wiring devices may lead to electric shock, plugs and sockets overheating and fire. Make sure the
operation is done by professional electricians, and strictly abide by the national and local electric laws and
regulations. Switch the power off and take measures to prevent the power switch from automatically tripping
before wiring.
6. To ensure a safe and smooth installation, use our accessories for installation and make sure the expansion tube
stays closely within the wall hole when installing it. Do not make the drill hole too large; doing so will cause the
expansion tube to be loose which may result in accidental damage.
7. Try to make the two sides of the range hood balanced when installing.
8. If there are no abnormal occurrences during a qualified test run after installation, read the instruction manual
carefully and keep it in a safe place.
5