Kruger KH 300 User Manual page 13

How to Clean the Baffle Filter
The spring bracing in figure 9 firmly supports the oil screen on the hood.
Refer to figure 10 to remove the oil screen gently. Use a sponge and warm soapy water to wash it, and make sure it is
completely dry before putting it back.
How to Replace the Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL THE UNIT IS COOL.
1
1. Make sure all controls are off and the range hood is unplugged.
2. Place a flat-headed screwdriver into the groove of the halogen light glass covering and the housing.
3. Pop out the halogen light glass covering.
4. Gently pull out the defective light bulb and discard. Light bulbs should be 12V 20W maximum.
5. Using a cloth, hold the new light bulb and push securely into light socket.
6. Return halogen light glass cover to the housing.
7. Turn range hood ON to test light.
Figure 9
2 3
13
Figure 10
4