Sharp XL-DV50H Operation Manual page 14

XL-DV50H
14
Downloaded From Disc-Player.com Sharp Manuals
System connections (continued)
! Placing the speaker system
Same distance Same distance
Front speaker
Front speaker
(right)
(left)
Notes:
" Place the TV halfway between the front speakers.
" The bass sound from the subwoofer is omni-directional, however,
it is recommended to place it as close as left and right speakers.
" The subwoofer vibrates whilst reproducing bass. Place it on a
stable sturdy surface.
" Keep the free space of at least 10 cm (4") along the right side of
the subwoofer.
! Magnetically shielded speakers
The speakers are magnetically shielded.
Therefore, they do not affect the display even you use them near the
TV. However, some colour variation may occur, depending on the
type of TV used.
If colour variation occurs...
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
If the colour variation is still present...
Move the speakers further away from the TV.
If any kind of magnet or an electromagnet is placed too close to the
TV and the system, irregular colours may appear on the TV screen.
! TV connection
Three types of sockets (VIDEO OUT, S-VIDEO OUT and SCART
OUT) are available for connection of a TV and this unit. Connect
according to your TV.
Connecting to a TV with a video input socket:
You can enjoy DVD images by connecting your TV and this unit with
the supplied video cable.
Subwoofer Set the video output mode to "S-Video" (default setting). For the
procedure, refer to "Changing the initial setting of DVD" on pages
44, 46.
TV
Change the input mode on the TV accordingly.
Press the SHIFT button and ANGLE/NTSC/PAL button on the re-
mote control.
Each time these buttons are pressed, the mode will change in the
following order:
NTSC Select this mode for the NTSC TV.
PAL Select this mode for the PAL TV.
04/3/19 XL-DV50H(A).fm
Video signal
Video cable (supplied)
To video
input socket
TINSEA027SJZZ