Enhancing Your System; 12 7. Video/Auxiliary Button; Headphone Socket - Sharp XL-DV50H Operation Manual

Enhancing your system

The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
Downloaded From Disc-Player.com Sharp Manuals
VCR, DVD, etc.
White
Red
White
Audio cable
(commercially available)
Dolby Digital/DTS amplifier or
Digital audio recorder, etc.
To the
optical line
Optical digital cable
input socket
(commercially available)
" Listening to the playback sounds from VCR,
DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX AUDIO IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
To the
2
Press the ON/STAND-BY button to turn the power on.
line output
3
sockets Press the VIDEO/AUX button.
4
Play the connected equipment.
Red
Note:
To prevent noise interference, place the unit away from the televi-
sion.
" Digital connection to a surround amplifier or a
digital audio recorder, etc.
Selecting a sound signal type
When connecting other equipment to the digital audio output, ad-
just the audio output setting accordingly (see page 44).
Bitstream
Choose this when connecting the unit to a Dolby Digital/DTS
(5.1ch) surround amplifier. When playing a DVD recorded in Dol-
by Digital or DTS, bitstream output allows you to enjoy the 5.1ch
surround sound.
LPCM
Choose this for PCM output. When playing a DVD recorded in Dol-
by Digital, the output converts to 2 channel PCM. When a DVD re-
corded in DTS is played back, signals are sent in bitstream.
" Headphones
! Before plugging in or unplugging the headphones, reduce the vol-
ume.
! Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
! Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
04/3/19 XL-DV50H(A).fm
XL-DV50H
1
2
3
4
5
6
7
8
9
10
53
TINSEA027SJZZ