Detachable Control Panel(D.c.p) - Boss 815CA User Manual

4. DETACHABLE CONTROL PANEL(D.C.P)

Removing The Detachable Front Panel
1.
Open
button
To remove the front panel:
1. Press the Panel Open Button.
2. After flipping down the front panel, push it rightwards (
front panel outwards (
Attaching The Detachable Front Panel
Step 1
1. To attach the front panel back to the unit
chassis, firstly join the left guide block
hole to the left cylinder (
join the right guide block hole and the
right cylinder (
Step 2
CAUTION
The D.C.P can easily be damaged by shocks. After removing it, place it in a protective case and be
careful not to drop it or subject it to strong shocks.
When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall.
To prevent damage to the D.C.P , always store it in a protective case after detaching it.
The rear connector that connects the main unit and the D.C.P is an extremely important part. Be careful
not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Socket
).
Step 2
Step 2
), then
Step 1
).
E - 4
2.
Step 2
), then draw the left of the
Step 1
2. Press the centre of the front panel until a "
click" sound is heard.
Note:
If the D.C.P is dirty, wipe off the dirt with soft,
dry cloth only. And use a cotton swab soaked
in isopropyl alcohol to clean the socket on
the back of the D.C.P .
Step 1