Miele H 4882 BP Operating And Installation Instruction page 70

Installing the oven
To ensure adequate ventilation to
the oven once installed:
- provide a ventilation cut-out in
the housing unit as illustrated.
- do not fit a rear panel into the
housing unit.
- do not fit insulation material
inside the housing unit.
Turn off the mains electricity supply
to the isolator.
^ Adhere the skid plates to the cabinet
floor.
70
^ Prepare the door for removal.
Flip up the locking clamps on each
door hinge.
^ Slowly shut the door until the
protruding clamps stop the
movement. Pull the door upward.
^ Connect the mains cable from the
oven to the isolator.
^ Push the oven into the furniture
housing unit as far as the oven trim,
and align it.