Embedded Web Server Rx - Utax 261ci User Manual

Preparation before Use > Embedded Web Server RX

Embedded Web Server RX

If the machine is connected to the network, you can configure various settings using Embedded Web Server RX.
This section explains how to access Embedded Web Server RX, and how to change security settings and the host
name.
For details on Embedded Web Server RX, refer to the Embedded Web Server RX User Guide.
NOTE
To fully access the features of the Embedded Web Server RX pages, enter the User Name and Password and click
[Login]. Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below.
Login User Name
Login Password
* Upper case and lower case letters are distinguished (case sensitive).
Settings that the administrator and general users can configure in Embedded Web Server RX are as follows.
Setting
Device The machine's structure can be checked.
Information Configuration, Counter, About Embedded Web Server RX
Job Status Displays all device information, including print and scan jobs, storing jobs,
scheduled jobs, and job log history.
Printing Jobs Status, Printing Job Log, Sending Job Status,
Scheduled Jobs, Sending Job Log, Storing Job Status,
Storing Job Log
Document Box Add or delete document boxes, or delete documents within a document box.
Custom Box*
Address Book Create, edit, or delete addresses and address groups.
Machine Address Book, External Address Book Settings, One Touch Key
Device Settings Configure the advanced settings of the machine.
Paper/Feed/Output, Original Settings, Energy Saver/Timer, Date/Time,
System
Function Settings Configure the advanced function settings.
Common/Job Defaults, Copy, Printer, E-mail, Scan to Folder, FAX*
Send and Forward, Forward Rules*
Network Settings Configure the network advanced settings.
General, TCP/IP, Protocol
Security Settings Configure the security advanced settings.
Device Security, Send Security, Network Security, Certificates
Management Configure the advanced management settings.
Settings Job Accounting, Authentication, ID Card*
History Settings, SNMP, Reset
*1 This is displayed when the optional SSD is installed.
*2 Only on products with the fax function installed.
*3 The logged in user may not be able to configure some settings, depending on the permissions of the user.
*4 This is displayed when the optional Card Authentication Kit is installed.
NOTE
Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the FAX
Operation Guide.
Admin
Admin
Description
1
, Sub Address Box*
2 2
, Polling Box* , Job Box Settings
1
, Operation Panel
4
, Notification/Report,
2-30
Administ-
rator
❍
❍
❍
❍
❍
❍
2
,
❍
❍
❍
General
User
❍
❍
3
❍*
3
❍*
-
-
-
-
-