Sony DCR-TRV738E Service Manual page 89

4. Flange Back Check
Subject Siemens star
(2.0m from the front of the lens)
(Luminance : approx. 200 lux)
Measurement Point Check operation on TV monitor
Measuring Instrument
Specified Value Focused at the TELE end and WIDE
end.
Note1: The data of page: 0, address: 10 must be "00".
Switch setting:
1) POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
3) DIGITAL ZOOM (Menu display) ................................... OFF
4) STEADY SHOT (Menu display) ..................................... OFF
Note2: When the auto focus is ON, the lens can be checked if it is focused
or not by observing the data on the page 1 of the adjustment remote
commander.
1) Select page: 0, address: 03, and set data: 0F.
2) Page 1 shows the state of the focus.
1 : 00 : XX
Odd: Focused
Even: Unfocused
Checking method:
1) Place the Siemens star 2.0m from the front of the lens.
2) To open the IRIS, decrease the luminous intensity to the
Siemens star up to a point before noise appear on the image.
3) Shoot the Siemens star with the zoom TELE end.
4) Turn on the auto focus.
5) Check that the lens is focused (Note2).
6) Select page: 6, address: 21, and set data: 10.
7) Shoot the Siemens star with the zoom WIDE end.
8) Observe the TV monitor and check that the lens is focused.
Processing after Completing Adjustments:
1) Select page: 6, address: 21, and set data: 00.
2) Select page: 0, address: 03, and set data: 00.
DCR-TRV738E/TRV740/TRV740E/TRV840
5. Mechanical Shutter Adjustment
Adjustment Page
Adjustment Address
Note1: The data of page: 0, address: 10 must be "00".
Input method:
1) Select page: 0, address: 01, and set data: 01.
2) Input the following data to page: F, addresses: 76 to 8F.
Note2: Press the PAUSE button of the adjustment remote commander
each time to set the data.
Address Data
76 40
77 00
78 34
79 00
7A 30
7B 00
7C 2A
7D 00
7E 28
7F 00
80 40
81 3A
82 31
83 31
84 35
85 1E
86 80
87 80
88 80
89 80
8A 80
8B 80
8C 03
8D 80
8E 80
8F 80
3) Select page: 0, address: 01, and set data: 00.
5-23
F
76 to 8F