11 Service Position
Note: For description of the disassembly procedures, see
the Section 10.
11.1. Checking of Panel P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Positioned the Front panel Unit as shown.
Step 4 Attach 30P FFC at a connector (CN2004) on the Main
P.C.B..
Step 5 Panel P.C.B. can be checked at diagram shown.
11.2. Checking of Main P.C.B. (Side
A)
Step 1 Remove Top Cabinet.
Step 2 Side A Main P.C.B. can be checked at diagram shown.
11.3. Checking of Main P.C.B. (Side
B)
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove Main P.C.B..
Step 4 Place the Main P.C.B. on an insulated material.
Step 5 Remove 4 screws.
Step 6 Lift up to remove the Main P.C.B..
40