Sales Demonstration Lock Function - Panasonic SA-AKX76PH Service Manual

8.5.2. CD Mechanism Error Code Table (CD Mechanism Unit)
Error Code Diagnostic Contents
CD H15 CD Open Abnormal
CD H16 CD Closing Abnormal
F26 Communication between
CD servo LSI and micro-p
abnormal.
8.6.

Sales Demonstration Lock Function

8.6.1. Entering into Sales demonstration lock mode
Here is the procedures to enter into the Sales demonstration lock mode.
Step 1: Turn on the unit.
Step 2: Select to any mode function.
Step 3: Press and hold [
The display will show upon entering into this mode for 2 sec..
Note: [ ] button is invalid and the main unit displays "LOCKED" while the lock function mode is entered.
OPEN/CLOSE
8.6.2. Cancellation of Sales demonstration lock mode
Step 1: Turn on the unit.
Step 2: Select to any mode function.
Step 3: Set volume to Vol 19.
Step 4: Press and hold [
The display will show upon entering into this mode for 2 sec..
Description of error
During operation
POS_SW_R On fail to be
detected with 4 sec. Error
No. shall be clear by force
or during cold start.
During operation
POS_SW_CEN On fail to
be detected with 4 sec.
Error No. shall be clear by
force or during cold start.
During switch to CD func-
tion, if SENSE = "L" within
failsafe time of 20ms.
] and [CD] keys for 5 sec or more.
OPEN/CLOSE
] and [CD] keys for 5 sec or more.
OPEN/CLOSE
Automatic FL Display
24
Remarks
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.