Combustible Surfaces; Service Access - Jandy PRO Series JXI200 Quick Reference Manual

CLEARANCES
Combustible Surfaces & Service Access
• Installation on a non-combustible
surface is recommended.
• Do not install on carpet.
• This unit can be installed on
combustible flooring.
6

Combustible Surfaces*

TOP:
EXHAUST SIDE:
HEADER SIDE:
SIDE PANELS:

Service Access*

TOP:
EXHAUST SIDE:
HEADER SIDE:
SIDE PANELS
(at least one):
* Clearances are manufacturer's tested values. These are given as minimum values. Where
local and national codes apply, and if the clearance values specified in the applicable
codes are different that those listed in this manual, use the greater value to ensure safest
operation.
For detailed information, refer to the complete installation and owner's manual.
6 inches (15 cm)
6 inches (15 cm) from surface of the exhaust vent
6 inches (15 cm)
6 inches (15 cm)
36 inches (45 cm)
6 inches (15 cm) from surface of the exhaust vent
12 inches (30 cm)
18 inches (22.5 cm) US
24 inches (60 cm) CAN