Notch; Menu - Teknetics DigiTek Owner's Manual

MENU

The control is similar to Discrimination in that it allows you to accept

NOTCH

or reject different types of metals. While DISC works left to right, the NOTCH
NOTCH
control allows you to accept or reject individual categories.
Categories eligible for NOTCH are , , , .
FOIL
5¢ ALUM Zn
Press to program the NOTCH feature. Each press of
or
cycles to a new category and that category icon will flash for
or
3 seconds. Then the category will reverse status. Alternatively, press
while the icon is flashing to accept the Notch. If the icon had previously
been illuminated it will now disappear indicating that the category has
been eliminated from detection. Likewise, an icon that is not visible on the
display will re-illuminate, indicating that the category is now notched in
(i.e. detected).
Use to select NOTCH. Each time you press
or or
the category to be notched flashes on the screen. Any of the 4 eligible
categories can be "Notched" in or out. After the category icon flashes
and times out, the Notch status will change.
14