Available Parameters On The Server - LevelOne FCS-1070 User Manual

Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
<parameter>=<value>\r\n
[<parameter pair>]
Only the parameters that you set and readable will be returned.
Example: Set the IP address of server to 192.168.0.123
Request:
http://myserver/cgi-bin/admin/setparam.cgi?Network_IPAddress=192.168.0.123
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n

Available parameters on the server

NOTE: The bold characters in table are the default value of each parameter.
Group: System
NAME
hostname
(r/w)
omit this parameter, it will redirect to an empty page.
(note: The return page can be a general HTML
file(.htm, .html) or script executable (.vspx) file. It can
not be a CGI command. It can not have any extra
parameters. This parameter must be put at end of
parameter list)
VALUE
<text string shorter than
40 characters>
DESCRIPTION
host name of server
<<Wireless>Network Camera <with
Pan/Tilt/<Zoom>>>