Build A Security Application - LevelOne FCS-1070 User Manual

Build a Security Application

The Administrator can combine options on
the application page to perform many useful
security applications. There are two trigger
sources coming from attached devices, such
as for motion detection. There are also two
kinds of actions responding to such events,
including uploading snapshots over the
Internet and driving other attached devices.
To upload the snapshots, the User can
choose either email or FTP according to
user's needs. Both e-mail and FTP use the network settings on the Mail & FTP page. Refer to
the definition section for detail configuration.
1. Click on "Configuration" on the homepage,
2. Click on "Application" in the left column,
3. Check the weekdays as you need and give
the period of "Snapshots begin" time and
"Snapshots end" time to monitor the triggering
conditions every day,
4. Check the "Event operation". The triggering
condition can be set to detected motion or
status of the attached device,
5. Set the delay before detecting next event to
avoid continuous false alarms following the
original event,
Send Snapshots When Motion is Detected
If no external sensor is available, the Administrator can use the built-in motion detection to
monitor any movement and send snapshots via emails for security check.
6. Click on "Motion detection" in the left column,
7. Check "Enable motion detection",
8. Click on "New" to have a new window to monitor video,
9. Type in a name to identify the new window,
10. Use the mouse to click, hold, and drag the window corner to resize or the title bar to move,