Disassembly Instructions (Also See The Video Clips On Care Point) - Nokia 9300 RAE-6 Service Manual

nokia
C P
ONNECTING EOPLE
CMO Sales and Marketing Customer Care EMEA
Technical Services, Repair Concepts

9. DISASSEMBLY INSTRUCTIONS (ALSO SEE THE VIDEO CLIPS ON CARE POINT)

1.) Protect the window with a film.
3.) Press down the Latch and open the Battery Cover.
5.) Push the Latch and open the A-Cover Assy.
7.) Remove the Keypad. Note the guide openings on
the UI Shield Assy when assembling the Keypad.
Service Manual 9300 Level 1&2
PAGE 12 (25)
CONFIDENTIAL
2.) Fit protective film to the LCD Module.
4.) Be sure that the battery is removed and then
continue with disassembly. Note to put back the
Sealing Tape after the re-assembly.
6.) Protect the LCD Module with a film.
8.) Unscrew the four, Torx Plus
shown order. Always use new screws when re-
assembling! For assembly, reverse the order and use a
Torx Plus size 6 driver with a torque setting of
®
25Ncm.
Copyright © 2004 Nokia Corporation. All rights reserved.
Approved 1.0
DJk
07.12.2004
size 6 screws in the
®