Nokia 9300 RAE-6 Service Manual page 15

nokia
C P
ONNECTING EOPLE
CMO Sales and Marketing Customer Care EMEA
Technical Services, Repair Concepts
25.) Open the hooks carefully by using the SRT-6 as a
lever.
27.) The same procedure on the shown side.
For assembly only!
Always use a new Adhesive Qwerty Keypad when re-
assembling!
30.) Remove the Chassis Assy. Always start from the
antenna side.
Service Manual 9300 Level 1&2
PAGE 15 (25)
CONFIDENTIAL
26.) Unlock the hooks along the edge of the Qwerty
Keypad as shown.
28.) Now, the Qwerty Keypad can be removed.
29.) Unscrew the eight, Torx Plus
order shown. Always use new screws when re-
assembling! For assembly, reverse the order and use a
Torx Plus size 6 driver with a torque setting of
®
25Ncm.
31.) Remove the DC-Jack by using the DC-plug.
Copyright © 2004 Nokia Corporation. All rights reserved.
Approved 1.0
DJk
07.12.2004
size 6 screws in the
®