Sw-Update - Nokia 9300 RAE-6 Service Manual

nokia
C P
ONNECTING EOPLE
CMO Sales and Marketing Customer Care EMEA
Technical Services, Repair Concepts

8. SW-UPDATE

To use FLS-4S Flash Dongle you have to follow the user guide inside the sales package. Please check always for the
latest version of flash software, which is available on Nokia
Flash Concept – (Point of Sales)
It is very important to follow this insertion and
removal procedure, otherwise the contact pins of Flash
Adapter will be damaged.
1.) Remove the Sealing Plug carefully by using the
dental tool. Do not scratch the test pads.
3.) Now, make sure that the contacts springs are
settled correctly.
2.) Lift up the Adapter while holding the release
tension.
Service Manual 9300 Level 1&2
PAGE 11 (25)
CONFIDENTIAL
Partner Web Site /Nokia Online.
The Flash Adapter is equipped with a movable part,
which is attached to the springs for fitting into the
battery holder.
2.) Insert by starting from Battery Spring side.
from Battery Connector side)
first press the adapter spring and then connect the test
pins with the test pads of the device.
1.) When removing the Adapter first release tension by
pressing as shown in the picture.
3.) Put back the Sealing Tape after the flashing.
Copyright © 2004 Nokia Corporation. All rights reserved.
Approved 1.0
07.12.2004
(NOT
To fix the Flash Adapter
DJk