Auto Scanning - ATEN CS-1742 User Manual

Auto Scanning

The CS-1742 / CS-1744's Auto Scan feature automatically cycles the KVM
focus through the computer ports at regular intervals. This allows you to
monitor the computer activity without having to take the trouble of switching
from port to port manually. See the table below for details.
Hotkey
[Scroll Lock] [Scroll Lock] [A]
[Enter]
[Scroll Lock] [Scroll Lock] [A]
[n] [Enter]
Note: 1. The n stands for the number of seconds that the CS-1742 / CS-1744
should dwell on a port before moving on to the next. Replace the n
with a number between 1 and 99 when entering this hotkey
combination.
2. While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Auto Scan Mode compliant keystrokes
and mouse clicks can be input. You must exit Auto Scan Mode in
order to regain normal control of the console. To exit Auto Scan
Mode, press [Esc] or [Spacebar].
Starts Auto Scan. The KVM focus cycles from port to port
at 5 second intervals.
Starts Auto Scan. The KVM focus cycles from port to port
at n second intervals.
4. Hotkey Operation
Action
15