Batch Insert Cameras - Vivotek ND8401 User Manual

Batch Insert Cameras

Batch insert is a very useful function that allows user to search, filter, and import a row of
devices that are in the same LAN to an NVR station. Basic settings can also be applied to those
inserted devices simultaneously.
Please follow the steps below to batch insert devices to the station:
a. Click Configuration > Camera Management > Batch Insert Cameras on the menu bar (or right-
click the station, then select Camera Management > Batch Insert Camera).
b. The Batch Insert Cameras window will pop up. Then click Search to open the Search Camera
window.
c. On top of the Camera List window, you can select "List the cameras which are not inserted" or "List all
cameras". The items listed below will then change accordingly.
d. Use the 4 Filters to narrow down the range of the wanted cameras from the list.
IP Range: Key in a range of IP address to narrow down the list; the filter automatically applies after

you fill in a correct IP range.
c
d
VIVOTEK
b
User's Manual - 45