E-Map Link - Vivotek ND8401 User Manual

NOTE:
The live view dialog also supports click on image, PTZ, and e-PTZ as long as the connected camera also
supports and has enabled these functions. To enable those function on E-map, please check the item "Enable click
on image" on the menu bar of LiveClient as shown below. Then an icon
you to control the cameras.

E-map Link

After completing device deployment on your E-map, you can link an E-map to another E-map.
Please follow the steps below to configure E-map link:
a. Select a map you want to edit and enter Edit Mode.
b. Drag-and-drop another E-map onto current E-map. A blue frame will appear as shown below.
For example: Link Map1 to Map2 by dargging Map2 onto Map1
c. Use to move the position of the blue frame.
will appear in the live view dialog for
2013/01/06 12:30:41
VIVOTEK
User's Manual - 121